Categories
498139

LevelOne WCS-0010 11g Network Camera Manual

56
Zoom out
Zoom in
Previous page
1/75
Next page
52
Chapter 6
Troubleshooting
This chapter covers the most likely problems and their solutions.
Overview
This chapter covers some common problems that may be encountered while using the
Network Camera and some possible solutions to them. If you follow the suggested
steps and the Network Camera still does not function properly, contact your dealer for
further advice.
Problems
Problem 1:
I can't connect to the Network Camera with my Web Browser to
configure it.
Solution 1:
It is possible that your PC's IP address is not compatible with the IP
address of the Network Camera.
Use the Camera Wizard utility to configure the Network Camera
with a valid IP address.
Problem 2:
The Camera Wizard utility doesn't list any Network Cameras.
Solution 2:
Check the following:
• The Network Camera is installed, LAN connections are OK, it is
powered ON and startup is complete.
• Ensure that your PC and the Network Camera are on the same
network segment. (If you don't have a router, this must be the
case.)
• Ensure that your PC has the TCP/IP network protocol loaded. In
Windows, this is done by using Control Panel-Network.
• If an entry for TCP/IP -> Network card is not listed, use Add
- Protocol - Microsoft - TCP/IP to add it.
• You then need to select the new entry (TCP/IP -> Network
card), click Properties, and configure the IP Address tab.
• If your LAN has a DHCP Server, you can select "Obtain an
IP Address automatically". Otherwise, you must select
"Specify an IP Address", and enter values for IP Address,
Subnet Mask, and Gateway. All devices on your LAN must
use compatible values. Remember that each device needs
a unique IP Address, and the same Subnet Mask.
Problem 3
When I try to connect to the Network Camera, I get prompted
for a user name and password.
Solution 3
You SHOULD be prompted for a user name and password if trying
to access the Administration menu.
Enter the Administrator ID and Password set on the Maintenance
screen.
6
… 56 …

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LevelOne WCS-0010 11g Network Camera at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LevelOne WCS-0010 11g Network Camera in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info