Manual Land Rover Defender TDi (page 111 of 191) (English)

626339

111

Zoom out

Zoom in

1/191

Wheel changing

108

Positioning the bottle jack

Always position the jack from the front or rear

of the vehicle directly in line with the jacking

points.

WARNING

NEVER use the jack from the side of the

vehicle.

Always use the complete, two piece, jack

lever throughout to minimise any accidental

contact with a hot exhaust system.

ONLY jack the vehicle using the jack

location points described or damage to the

vehicle could occur.

Front jacking point:

Position the jack so that, when raised, it

engages with the front axle casing

immediately below the coil spring. The jack

cradle must locate between the flange at the

end of the axle casing and the large bracket to

which the front suspension members are

mounted.

Rear jacking point:

Push the mud flap up over the tyre to allow

clear access (return it to its correct position

when the wheel change is complete). Position

the jack so that, when raised, it engages with

the rear axle casing immediately below the coil

spring and as close as possible to the shock

absorber mounting bracket.

Care of the jack

Occasionally, clean and grease the moving

parts (particularly the ram/pillar) to prevent

rust.

The bottle jack oil level should be checked at

normal servicing intervals and if necessary

topped up with an hydraulic oil with a

viscosity to BS 4231 grade 32 and ISO proof

32.

To avoid contamination, the bottle jack should

always be returned to its fully closed position

and must always be stowed upright.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Land Rover Defender TDi in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Land Rover Defender TDi Manual

Product: