LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice.
No liability for technical errors and/or omissions. 111045/0415
b
ca
aPower
OffDevice switched off
Green, on (perma-
nently)
Device operational
Blinking red/greenConfiguration password not set. Without a
configuration password, the configuration
data in the device is unprotected.
Blinking alternately
orange/green with
the WLAN link LED
At least one WLAN module is in managed
mode and has not found a WLAN
Controller yet. The corresponding WLAN
module(s) is/are switched off until a
WLAN Controller is found to supply a
configuration, or until being switched
manually into another operating mode.
Blinking alternately
orange/red with
the WLAN link LED
At least one WLAN module is in managed
mode and has found a WLAN Controller.
However, the WLAN Controller cannot as-
sign a configuration because the firmware
and/or the device's loader version is not
compatible with the WLAN Controller.
4
A")+%V\cYjVaL^gZaZhh
Hardware
Power supply12 V DC, external power adapter (110 or 230V) with bayonet connector to secure against
disconnection
Power consumptionApprox. 15.36 watt via 12V/1.5 A power adapter (value refers to the overall power for the
access point and power adapter), about 12.9 watts via PoE
EnvironmentTemperature range 0 – 40°C; humidity 0-95%; non-condensing.
Temperature range 0 – 45° C when mounted vertically on a LANCOM wall mount with cables
License information for the device firmware (LCOS) is available in
the file LCOS-Licenses.txt on the data medium supplied.
ab
Please observe the fol-
lowing when setting up
the device
1 For devices to be
operated on the
desktop, please attach
the adhesive rubber
footpads
1 Do not rest any objects
on top of the device
1 Keep the ventilation
slots on the side of
the device clear of
obstruction
1 In case of wall
mounting,use the
drilling template as
supplied
1 Lockable wall mounting
with the LANCOM Wall
Mount (available as an
accessory).
LANCOM 1681V
Power
VDSL
Online
ETH 1
ETH 2
VPN
ETH 3
ETH 4
ISDN Status
Optional: Serial
configuration cable:
You can connect the
device to a PC with a
configuration cable
(available separately).
a
LAN
Use the cable with the kiwi-
colored connectors to connect
the interface ETH to your PC or
a LAN switch.
bc
Power
When connecting the
cable to the device, turn
the bayonet connector
90° clockwise.
Use only the supplied
power adapter.
MOUNTINGANDCONNECTINGTHEDEVICE
TECHNICALDATA
bWLAN Link
OffNo WLAN network defined or WLAN
module deactivated. The WLAN module is
not transmitting beacons.
GreenAt least one WLAN network is defined
and WLAN module activated. The WLAN
module is transmitting beacons.
Green inverse
flashing
Number of flashes = number of connected
WLAN stations and P2P wireless
connections, followed by a pause (default).
Alternatively the frequency of the flashing
can indicate signal strength over the
defined P2P link or the signal strength
between the access point and the device
operating in client mode.
Blinking greenDFS scanning or other scan procedure.
Blinking redHardware error in WLAN module.
To achieve the best signal for a wall mounting, align the top surface of the unit towards the area that requires
coverage. When operating both WLAN modules in the same frequency band, mutual interference cannot be
ruled out.
5
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Lancom L-460agn dual Wireless at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Lancom L-460agn dual Wireless in the language / languages: English as an attachment in your email.
The manual is 0,56 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
