LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for
technical errors and/or omissions. 111577/0117
Please observe the
following when setting
up the device
AMount the device into
a 19” unit in a server
cabinet
AFor devices to be
operated on the
desktop, please attach
the adhesive rubber
footpads
ADo not rest any objects
on top of the device
AEnsure that the
ventilation slots remain
unobstructed
Hardware
Power supplyInternal power supply unit (110–230 V, 50-60 Hz), PoE based on IEEE 802.3af and IEEE 802.3at
Power consumptionmax. 160 watts
EnvironmentTemperature range 0–40°C; humidity 10–90%; non-condensing
HousingRobust metal housing, 19“ 1U (220 x 45 x 242 mm > W x H x D) with removable mounting brackets,
network connectors on the front
Number of fansNone; fanless design without rotating parts, high MTBF
Interfaces
ETHA8 TP Ethernet-Ports 10/100/1000 Mbps
A2 Combo-Ports (TP/SFP) 100/1000 Mbps (SFP) and 10/100/1000 Mbps (TP)
A10 concurrent ports in total
Declaration of Conformity
The Declaration of Conformity can be found on the product page of our website www.lancom-systems.com
Mounting bracketsTwo 19” brackets for rackmounting
CableIEC power cord, serial conguration cable 1.5 m
MOUNTING AND CONNECTING THE DEVICE
LANCOM GS-2310P+
Quick Reference Guide
SECURE. NETWORKS.
d SFP Ports
offPort inactive
greenLink 1000 Mbps
orangeLink ≤ 100 Mbps
c TP Ethernet Ports
offPort inactive
greenLink 1000 Mbps
orangeLink ≤ 100 Mbps
b Mode Switch
Short pressPort LED display switch
5 seconds pressedRestart of the device
10 seconds pressedReset and restart of the device
a System / Link/Act / Speed / PoE
System: offDevice switched off
System: greenDevice operational
Link/Act/Speed: greenPort LEDs show link / activity / speed
PoE: greenPort LEDs show PoE status
ConsoleMode/Reset
PoE
Link/Act/Speed
System
a
bd
c
Power connector
Supply power to the
device via the power
connector on the back.
Please use the IEC
power cable supplied.
TP Ethernet ports
Connect one of the TP
Ethernet ports 1-10 via
an Ethernet cable to your
end device or another
LAN switch.
b
Serial connector
Connect the serial
interface (CONSOLE)
via the included serial
conguration cable to
the serial interface of the
device you want to use for
conguring/monitoring
the switch.
cd
SFP ports
Insert a suitable SFP
module (e.g. 1000Base-SX
or 1000Base-LX) into the
SFP port. Choose a cable
compatible with the SFP
module and connect it as
described in the module’s
documentation.
a
Ports 9 and 10 are combo ports. Either the TP- or the SFP port can be
used.
5
b cd
ConsoleMode/Reset
PoE
Link/Act/Speed
System
LANCOM GS-2310P+
ConsoleMode/Reset
PoE
Link/Act/Speed
System
LANCOM GS-2310P+
a
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Lancom GS-2310P plus at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Lancom GS-2310P plus in the language / languages: English as an attachment in your email.
The manual is 0,25 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
