Manual Lancom 9100 VPN (page 1 of 1) (English)

680933

Zoom out

Zoom in

1/1

LANCOM 1681V

Power

VDSL

Online

ETH 1

ETH 2

VPN

ETH 3

ETH 4

ISDN Status

A6C8DB.&%%KEC

8dc[^\

EdlZg

;Vc

8DB

Dca^cZ

7VX`je

HiVcYWn

KEC

53"%4( %4( %4( %4( )3$.

b c d e f g

                                 

             

h 

Green off No networking device attached

Green on

(permanently)

Connection to network device

operational, no data trafc

Flickering green Data transmission

Yellow off 1000 Mbps

Yellow on

(permanently)

10/100 Mbps



LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for

technical errors and/or omissions. 110975/0612







1 Mount the device into

a 19” unit in a server

cabinet.

1 For devices to be

operated on the

desktop, please attach

the adhesive rubber

footpads

1 Do not rest any objects

on top of the device

1 Ensure that the

ventilation slots at

the back remain

unobstructed

f 

Supply power to the

device.

Please use the IEC power

cable supplied.



Power supply Internal power supply unit (110-230 V, 50-60 Hz)

Power consumption 30 W

Environment Internal power supply unit (110–230 V, 50-60 Hz)

Housing Internal power supply unit (110–230 V, 50-60 Hz)

Number of fans 1



ETH 4 individual 10/100/1000-Mbps Fast Ethernet ports; up to 3 ports can be switched as additional WAN

ports with load balancing

USB USB 2.0 full- speed host port for connecting USB printers (USB print server) or serial devices (COM port

server); bi- directional data exchange is possible (max. 12 Mbps).

Cong (Com) Serial conguration interface / COM port (8 pin Mini-DIN): 9,600 - 115,000 baud, suitable for optional

connection of analog/GPRS modems

ISDN* ISDN S0 Bus



Ethernet PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and plain Ethernet (with or without DHCP), RIP- 1, RIP-2,

VLAN, IP

ISDN* 1TR6, DSS1 (Euro- ISDN), PPP, X75, HDLC, ML-PPP, V.110/GSM/HSCSD, CAPI 2.0 over LANCAPI, Stac data

compression



CE EN 55022, EN 55024, EN 60950

FCC FCC Class A Part 15



Manual Quick Reference Guide (DE, EN) and Quick Installation Guide (DE/EN/FR/ES/IT/PT/NL),

FCC Documentation (only US-Version)

CD/DVD CD with rmware, management software (LANcong, LANmonitor, LANCAPI) and documentation

Cable Serial conguration cable, 1.5m

Cable 2 Ethernet cables, 3m

Cable* ISDN cable, 3m

Cable IEC power cord

*) ISDN is not available in US version

a 

Off Device switched off

Green on (permanently) Device operational

Blinking

green/orange

Conguration password not set. Without

a password the conguration data in the

device is unprotected.

Blinking red Charge or time limit reached

a 



You can connect the

device to a PC with a

conguration cable.

d 

You can use the USB

interface to connect a

USB printer or a USB ash

drive for device congura-

tion.

e 

Use this switch to turn the

device on or off.

b

Use the cable with the

kiwi-colored connectors

to connect one of the in-

terfaces ETH1 to ETH4 to

your PC or a LAN switch.

Unplug the power plug from the power socket

to ensure that the device is completely sepa-

rated from the power supply!

b 

Green on (permanently) CPU temperature OK

Orange on

(permanently)

CPU temperature > 55°

Blinking red Hardware failure of the fan or CPU tem-

perature > 60°; additional acoustic signal

c 

Off No session logged on for the serial con-

guration interface

Green on

(permanently)

Serial conguration session logged on

Flickering orange Data transmission during the conguration

session

d 

Red on (permanently) The LANCOM WLAN controller is not yet

operational; one of the following elements

is missing:

1 Root certicate

1 Device certicate

1 Current time

1 Random number for the DTLS encryption

Green on

(permanently)

At least one active access point connected

and authenticated.

Blinking red The device is operational but not con-

nected to an active access point.

g 

Off No VPN connection active

Green on

(permanently)

VPN connection active

Blinking green Establishing VPN connections

f 

Off No VRRP activated or VRRP acti-

vated and a predened virtual router

is set as Master

Green on

(permanently)

All dened virtual routers are on

standby

Red on

(permanently)

All virtual routers are deactivated

e 

Off Backup is deactivated for all of

the WAN connections and virtual

routers.

Green on

(permanently)

Backup is activated for at least one

WAN connection or virtual router

c 

Use the ISDN cable with

the light-blue connec-

tors to connect the ISDN

interface to the NTBA if

you wish to use ISDN in

addition.

A6C8DBLA8")%'*

8dc[^\

EdlZg

;Vc

8DB

Dca^cZ

7VX`je

HiVcYWn

KEC

53"

%4( %4( %4( %4(

)3$.

a d ecb f



1 Device name

1 Firmware version

1 Device temperature

1 Date and time

1 CPU load

1 Memory usage

1 Number of VPN tunnels)

1 Data transfer in reception direction

1 Data transfer in transmission direction

 7100 VPN

 9100 VPN

                          

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lancom 9100 VPN in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom 9100 VPN

Lancom 9100 VPN Quick start guide - German - 1 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lancom 9100 VPN Manual

Product: