703318
1
Zoom out
Zoom in
Hardware
Power supply 12 V DC, external power adapter (110 or 230 V) with bayonet connector to secure against
disconnection
Power consumption Max. ca. 11 W
Environment Temperature range 0 – 40 °C; humidity 0 – 95 %; non-condensing
Housing Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; measures
210 x 45 x 140 mm (W x H x D)
Number of fans None; fanless design, no rotating parts, high MTBF
Interfaces
WAN 10 / 100 / 1000 Mbps Gigabit Ethernet
ETH 4 individual 10 / 100 / 1000-Mbps Fast Ethernet ports; operate as switch ex-factory.
Up to 3 ports can be switched as additional WAN ports.
USB USB 2.0 Hi-Speed host port for connecting USB printers (USB print server), serial devices
(COM-port servers), USB data media (FAT le system), or supported UMTS USB modems
SFP Socket for small form-factor pluggable Gigabit-Ethernet transceiver (mini-GBIC).
Compatible with optional LANCOM SFP modules for optical connections over short distances
(SX) or longer distances (LX). Set as a LAN port ex-factory, can be congured as a WAN port
Serial Interface Serial conguration interface / COM port (8-pin Mini-DIN): 9,600 - 115,000 baud, suitable for
optional connection of analog/GPRS modems. Supports internal COM-port server and provides
transparent asynchronous serial data transmission via TCP
WAN protocols
Ethernet PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1,
RIP-2, VLAN, IP
Declaration of Conformity
Hereby, LANCOM Systems declares that this device is in compliance with Directives 2014/30/EU and 2014/35/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.lancom-systems.com/ce/
Package content
Documentation Hardware Quick Reference Guide (DE/EN); Installation Guide (DE/EN)
Cable 2 Ethernet cables, 3m (LAN: kiwi-colored connector; WAN: green connector)
Power adapter External power supply adapter (230 V); NEST 12 V / 2 A DC/S; barrel / bayonet (EU),
LANCOM item no. 111303 (not for WW devices)
This product contains separate open-source software components which are subject to their own licenses, in particular
the General Public License (GPL). The license information for the device rmware (LCOS) is available on the device‘s
WEBcong interface under “Extras > License information“. If the respective license demands, the source les for the
corresponding software components will be made available on a download server upon request.
a Power
Off Device switched off
Green, permanently* Device operational,
resp. device paired / claimed and LANCOM
Management Cloud (LMC) accessible
Red/green, blinking Conguration password not set. Without a
conguration password, the conguration
data in the device is unprotected.
Red, blinking Hardware error
Red, blinking slowly Time or charge limit reached/error message
occurred
1x green inverse
blinking*
Connection to the LMC active, pairing OK,
device not claimed
2x green inverse
blinking*
Pairing error, resp. LMC activation code
not available
3x green inverse
blinking*
LMC not accessible, resp. communication
error
b Online
Off WAN connection inactive
Green, permanently WAN connection active
Red, permanently WAN connection error
c SFP
Off SFP deactivated in the conguration
or SFP module present, no connection to
network device
Red, permanently SFP enabled in the conguration but no
SFP module present
Green, permanently SFP module present, connection to
network exists, no data transmission
Green, blinking Data transmission
Red, blinking SFP module present, hardware error
f VPN
Off No VPN connection active
Green, permanently VPN connection active
Green, blinking Establishing VPN connection
e ETH
Off No link
Green, permanently Network connection ready (link)
Green, ickering Data transmission
d WAN
Off Interface deactivated
Orange, blinking Synchronization with the modem
Orange, permanently Synchronization with the modem
successful
Green, permanently WAN connection established
Green, ickering WAN data transmission
Red/orange, blinking Hardware error, ext. modem
TECHNICAL DETAILS
MOUNTING AND CONNECTING THE DEVICE
LANCOM 1790EF
WAN
SFP
ETH 2
Power
ETH 1
Online
ETH 4
ETH 3
VPN
*) The additional power LED statuses are displayed in 5-seconds
rotation if the device is congured to be managed by the LANCOM
Management Cloud.
a c d e fb
Config (Com)ETH 3 ETH 2 ETH 1 DC 12 VResetUSBETH 4WAN
SFP
LANCOM 1790EF
Quick Reference Guide
Cloud-ready
a c d e f gb
a
SFP interface
Insert a suitable SFP module (e.g. 1000Base-SX or 1000Base-LX)
into the SFP port. Choose a cable compatible with the SFP module
and connect it as described in the module’s documentation. SFP
modulel and cable are not included.
b
WAN interface
Use the cable with the green connectors to connect the WAN
interface to your WAN modem..
c
Ethernet interfaces
Use the cable with the kiwi-colored connectors to connect one of
the interfaces ETH 1 to ETH 4 to your PC or a LAN switch.
d
Conguration interface
Use a serial conguration cable to connect the serial interface
(COM) to the serial interface of the device you want to use for
conguring / monitoring (separately available).
e
USB interface
Connect a USB data medium or a USB printer to the USB
interface. (USB cable not supplied)
f
Reset button
Pressed up to 5 seconds: device restart
Pressed until rst ashing up of all LEDs:
conguration reset and device restart
g
Power
After connecting the cable to the device, turn the bayonet
connector 90° clockwise until it clicks into place.
Use only the supplied power adapter.
4
Please observe the following when setting up the device
A Do not rest any objects on top of the device
A For devices to be operated on the desktop, please attach the
adhesive rubber footpads
A In case of wall mounting, use the drilling template as supplied
A Keep the ventilation slots on the side of the device clear
of obstruction
A Rack installation with the optional LANCOM Rack Mount
(separately available)
LANCOM 1681V
Power
VDSL
Online
ETH 1
ETH 2
VPN
ETH 3
ETH 4
ISDN Status
Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may
be trademarks or registered trademarks of their owners. This document contains statements relating to future products and their attributes.
LANCOM Systems reserves the right to change these without notice. No liability for technical errors and/or omissions. 111809/0419


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom 1790EF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom 1790EF in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom 1790EF

Lancom 1790EF User Manual - English - 6 pages

Lancom 1790EF Installation Guide - English - 18 pages

Lancom 1790EF Installation Guide - German - 18 pages

Lancom 1790EF Quick start guide - German - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info