703327

Lancom 1781VAW Manual

1
Zoom out
Zoom in
Previous page
1/1
Next page
LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered
trademarks of their owners. Subject to change without notice. No liability for technical errors and/or omissions. 111652/0817
4
Please observe the
following when setting
up the device
a For devices to be
operated on the
desktop, please attach
the adhesive rubber
footpads
a Do not rest any objects
on top of the device
a Keep the ventilation
slots on the side of
the device clear of
obstruction
a In case of wall
mounting, use the
drilling template as
supplied
a Rack installation with
the optional LANCOM
Rack Mount (not
supplied)
LANCOM 1681V
Power
VDSL
Online
ETH 1
ETH 2
VPN
ETH 3
ETH 4
ISDN Status
Hardware
Power supply 12 V DC, external power adapter (230 V); bayonet connector to secure against disconnection
Power consumption Max. ca. 14 W
Environment Temperature range 0–35 °C, humidity 0–95 %, non-condensing
Housing Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock;
measures 210 x 45 x 140 mm (W x H x D)
Number of fans None; fanless design, no rotating parts, high MTBF
Interfaces
WAN: VDSL2
A VDSL2 as per ITU G.993.2; proles 8a, 8b, 8c, 8d, 12a, 12b, 17a
A Compatible to VDSL2 from Deutsche Telekom AG (only over ISDN)
A ADSL conformity according to:
ADSL2+ over ISDN as per ITU G.992.5 Annex B /J with DPBO (POTS: Annex A/Annex M),
ADSL2 over ISDN as per ITU G.992.3 Annex B (POTS: Annex A/L),
ADSL over ISDN as per ITU G.992.1 Annex B (POTS: Annex A)
A Supports just one virtual connection at a time in ATM (VPI-VCI pair)
ETH 4 individual ports, 10 / 100 / 1000 Mbps Gigabit Ethernet, by default set to switch mode. Up to 3
ports can be operated as additional WAN ports. Ethernet ports can be electrically disabled in the
LCOS conguration.
USB USB 2.0 Hi-Speed host port for connecting USB printers (USB print server), serial devices (COM-port
servers) or USB data media (FAT le system)
ISDN ISDN S
0
bus
Serial Interface Serial conguration interface / COM port (8-pin Mini-DIN):
9,600–115,000 baud, suitable for optional connection of analog/GPRS modems. Supports internal
COM-port server and provides transparent asynchronous serial-data transfer via TCP.
Ant 1, Ant 2 Two reverse SMA connectors for external LANCOM AirLancer antennas or for antennas from other
vendors. Please respect the restrictions which apply in your country when setting up an antenna
system. For information about calculating the correct antenna setup, please refer to
www.lancom-systems.com.
WAN protocols
VDSL, ADSL, Ethernet PPPoE, PPPoA, IPoA, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP),
RIP-1, RIP-2, VLAN, GRE, EoGRE, L2TPv2 (LAC or LNS), IPv6 over PPP (IPv6 and IPv4/IPv6 dual stack
session), IP(v6)oE (autoconguration, DHCPv6 or static)
ISDN 1TR6, DSS1 (Euro-ISDN), PPP, X75, HDLC, ML-PPP, V.110/GSM/HSCSD
Declaration of conformity
Hereby, LANCOM Systems declares that this radio equipment is in compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following internet address: www.lancom-systems.com/ce/
Package content
Manual Quick Reference Guide (DE/EN), Installation Guide (DE/EN)
Cable Ethernet cable, 3m (kiwi-colored connectors), 1 DSL cable for an IP-based line, 4.25 m,
ISDN cable, 3m (light-blue connectors)**
Antennas Two 3dBi dipole dualband antennas
Power adapter External power supply adapter (230 V), NEST 12 V / 1.5 A DC/S, barrel connector 2.1 / 5.5 mm
bayonet, LANCOM item no. 111301 (EU, 230 V); LANCOM item no. 111302 (UK, 230 V)
**) Included only in the “over ISDN” version
This product contains separate open-source software components which are subject to their own licenses, in particular the
General Public License (GPL). The license information for the device rmware (LCOS) is available on the device‘s WEBcong
interface under “Extras > License information“. If the respective license demands, the source les for the corresponding
software components will be made available on a download server upon request.
a Power
Off Device switched off
Green, permanently* Device operational,
resp. device paired / claimed and LANCOM
Management Cloud (LMC) accessible
Green / orange, blinking Conguration password not set. Without a
conguration password, the conguration
data in the device is unprotected.
Red, blinking Charge or time limit reached
1x green inverse
blinking*
Connection to the LMC active, pairing OK,
device not claimed
2x green inverse
blinking*
Pairing error, resp.
LMC activation code not available
3x green inverse
blinking*
LMC not accessible, resp.
communication error
b Online
Off WAN connection inactive
Green, permanently WAN connection active
Red, permanently WAN connection error
g VPN
Off VPN connection inactive
Green, permanently VPN connection active
Blinking green Establishing VPN connections
e ETH
Off No networking device attached
Green, permanently Connection to network device operational,
no data trafc
Green, ickering Data transmission
d ISDN
Off Interface deactivated
Green, permanently D-channel active
Orange, permanently B-channel active
Green, ickering ISDN data transmission
Red, ickering ISDN transmission error
Red / orange, blinking ISDN hardware error
c DSL
Off Interface deactivated
Green, permanently DSL connection active
Green, ickering DSL data transmission
Red, ickering DSL transmission error
Red / orange, blinking DSL hardware error
SETTING UP AND CONNECTING THE DEVICE
TECHNICAL DATA
f WLAN
Off No Wi-Fi network dened or Wi-Fi module
deactivated. The Wi-Fi module is not
transmitting beacons.
Green, permanently At least one Wi-Fi network is dened and
Wi-Fi module activated. The Wi-Fi module
is transmitting beacons.
Green, inverse ashing Number of ashes = number of connected
Wi-Fi stations and P2P wireless connec-
tions, followed by a pause (default).
Alternatively the frequency of the ashing
can indicate signal strength over the
dened P2P link or the signal strength
between the access point and the device
operating in client mode.
Green, blinking DFS scanning or other scan procedure
When working with separately purchased antennas, please ensure you do not exceed the maximum permissible transmission power. The system operator is
responsible for adhering to the threshold values.
Antennas are only to be attached or changed when the device is switched off. Mounting or demounting antennas with the device switched on may cause the
destruction of the Wi-Fi module!
5
LANCOM 1781VAW
Quick Reference Guide
Cloud-ready
c
ba
d
e
f
g
b
VDSL
Ant 2 Ant 1
a
VDSL- / ADSL interface
Use the supplied DSL cable for the
IP-based line to connect the VDSL
interface and the provider’s telephone
socket. For more information, please
contact your Internet service provider.
b
Wi-Fi antennas
Screw the two supplied Wi-Fi
antennas onto the connectors
Ant 1 andAnt 2. Depending on how
the antennas are to be used,
‘Antenna Grouping’ may need to be
congured in order to provide the
desired MIMO behavior.
c
Ethernet interface
Use the cable with the kiwi-colored
connectors to connect one of the
interfaces ETH 1 to ETH 4 to your
PC or a LAN switch.
d
Serial interface
You can connect the device to a PC with a
conguration cable ( available separately).
e
USB interface
Connect a USB storage device or a USB printer
to the USB interface.
USB cable not included in the package.
f
ISDN interface
Use the ISDN cable** with the light-blue
connectors to connect the ISDN interface to
the NTBA if you wish to use ISDN.
g
Power
When connecting the cable to the device, turn
the bayonet connector 90° clockwise until it
clicks into place.
Use only the supplied power adapter.
a
LANCOM 1781VAW
DSL
ETH 2
Power
ETH 1
Online
ISDN
ETH 4
ETH 3
VPN
WLAN
c db ge f
*) The additional power LED statuses are displayed in 5-seconds
rotation if the device is congured to be managed by the LANCOM
Management Cloud.


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom 1781VAW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom 1781VAW in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom 1781VAW

Lancom 1781VAW Installation Guide - English - 18 pages

Lancom 1781VAW Installation Guide - German - 18 pages

Lancom 1781VAW Quick start guide - German - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info