618565

Lakeland 16147 Manual

6
Zoom out
Zoom in
Previous page
1/21
Next page
10 11
bread will be continued automatically within 10 minutes, even without pressing the START/
STOP button. If the interruption time exceeds 10 minutes, the memory cannot be kept and you
must discard the ingredients in the bread pan and start again. If the dough has not entered the
risingphasewhenthepowersupplybreaksoff,youcanpresstheSTART/STOPbuttondirectlyto
continue the programme from the beginning.
WARNING DISPLAY
If the display screen shows “H HH” after you have pressed the START/STOP button and the
machine beeps continuously the temperature inside is too high. Stop the programme, open the
lid and allow the bread maker to cool down for 10 – 20 minutes.
Ifthedisplayscreenshows“LLL”afterpressingtheSTART/STOPbuttonandthemachinebeeps
continuouslythetemperatureinsideistoolow.PresstheSTART/STOPbutton,openthelidand
allow the bread maker to rest for 10 – 20 minutes to return to room temperature.
Ifthedisplayscreenshows“EEO”or“EE1”aftertheSTART/STOPbuttonhasbeenpressedthe
temperature sensor has developed a fault. Contact Lakeland Customer Services for further advice.
How to assemble the Bread Maker and using for the very first time
When the Bread Maker is used for the first time it may emit a slight burning smell when first
switched on. This is completely normal with a new heating element.
You will need to operate the Bread Maker empty for the very first use. This will also show you how
easy the Bread Maker is to use.
To do this;
1. Wash the bread pan and kneading paddle in hot, soapy water, rinse and dry thoroughly.
2. Place the Bread Maker on a flat, dry surface.
3. Position the bread pan in the baking chamber holding it at a slight angle and turning it
clockwise until it clicks into place.
4. Fix the kneading paddle onto the drive shaft.
5. Close the lid.
6. Switch on at the socket.
7. The Bread Maker will beep and the display screen will show the default setting 1,3:00
8. Press the MENU button repeatedly – the programme numbers will scroll through. Stop
pressing at programme number 11, 1:00 (BAKE). If you go past the number you require
simply keep pressing until programme 11 comes round again.
9. Selectprogramme11(BAKE)andpressSTART/STOP.
10. The bread maker will begin to count down and you can follow this on the display screen.
Leave the Bread maker to BAKE for 10 minutes. You will hear some intermittent clicks during
this time.
11. PresstheSTART/STOPbuttonrmlytostoptheprogramme.
12. Open the Bread Maker and allow cooling completely.
13. Lift out the kneading paddle then remove the bread pan by turning anti clockwise and lifting out.
14. Wash, rinse and dry the bread pan and kneading paddle again and replace.
You are now ready to make your first loaf.
Instructions for use
HOW TO MEASURE INGREDIENTS
One of the most important steps for making good bread is to use the exact measure of ingredients.
Always use the measuring cup and spoons provided with your Bread Maker.
If you prefer to use kitchen scales, metric measurements have also been included in the recipe section.
• Anyliquidshouldbemeasuredwiththemeasuringcuporspoonprovided.Observethelevel
of the measuring cup at eye level.
• When measuring cooking oil or other liquids, wash, rinse anddrythemeasuring cup and
spoon thoroughly before measuring any other ingredients.
• Drymeasuringmustbedonebygentlyspooningingredientsintothemeasuringcupandthen,
once filled, level it off with a knife. Do not be tempted to add more than required or to pack
it down tightly into the cup as it will affect the recipe. When measuring small amounts of
dry or liquid ingredients, use the measuring spoon supplied. Measurements must be level, not
heaped, as this could affect the recipe.
• Themaximumquantityofouryoushoulduseis2
¹
³
/
rd cups, 375g; the maximum amount of
yeast is 5g, 2 teaspoons.
The measuring cup holds 160g, 200ml
1 teaspoon = 5ml
1 tablespoon = 15ml
MAKING A LOAF – Things to remember
How to put the ingredients into the bread pan;
Ensure the ingredients are put into the Bread Maker in the exact order given in the recipe,
for example;
First, liquid ingredients at room temperature or as specified in the recipe.
Second, dry ingredients. Add the flour gently and make sure it is evenly distributed over the
liquid. If you tip it onto the liquid too fiercely the liquid may seep up through the flour and affect
the action of the yeast. This is particularly important if you are using the time delay.
Last, yeast. The yeast must be kept separate from the wet ingredients and salt. Create a
small hole in the dry ingredients using your finger or a spoon and place the yeast in the hole.
Make sure the yeast is fresh – check the use by date.
Ensure the ingredients are at room temperature unless otherwise stated. Water should be cold
unless the recipe states otherwise (as in ULTRA FAST programme).
Dry ingredients
Yeast or sodaSalt
Water or liquid
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lakeland 16147 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lakeland 16147 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info