618565
20
Zoom out
Zoom in
Previous page
1/21
Next page
38 39
Care and cleaning
• Unplug the Bread Maker and allow to cool completely before cleaning.
• Before the first use and after every use, clean each part thoroughly.
• Periodically check all parts before reassembly.
• Do not use metal tools in the non stick bread pan – always use plastic, nylon or silicone
spatulas etc.
• Never immerse the unit in water or any other liquid.
• To clean the unit and control panel, wipe with a clean, damp cloth and dry before storing.
• Do not use abrasive cleaners, steel wool or abrasive materials or cleansers.
• Wash the baking pan, kneading paddle, measuring cup and spoon in hot, soapy water, rinse
and dry thoroughly.
• The baking pan, kneading paddle, measuring cup and spoon are top shelf dishwasher safe.
• If the kneading paddle is difficult to remove from the bread pan, pour in sufficient warm
soapy water to cover the paddle and leave to soak for 10 – 15 minutes. This will loosen the
paddle.
• If the kneading paddle still cannot be removed hold the drive shaft from underneath the pan
and twist back and forth until the kneading paddle is released.
• To clean the baking chamber, remove any bread crumbs by tipping them out or wiping them
away with a slightly damp cloth or clean pastry brush.
• If food residue burns onto the heating element, allow to cool completely then wipe away
with a damp cloth.
• Store the Bread Maker with the power cable loosely coiled. Never wrap it tightly around
the bread maker.
Earth (green/yellow)
10 amp fuse
Live (brown)
Neutral (blue)
N
E
L
10 amp FUSE
Electrical connections
THIS APPLIANCE MUST BE EARTHED
This appliance is fitted with a fused three-pin plug to BS1363 which is suitable for use in all
homes fitted with sockets to current specifications. If the fitted plug is not suitable for your socket
outlets, it should be cut off and carefully disposed of. To avoid an electric shock, do not insert the
discarded plug into a socket.
Fitting a new plug
If for any reason you need to fit a new plug, the flexible mains lead must be connected as shown
here. The wires in the mains lead fitted to this appliance are coloured in accordance with the
following code:
Connect BLUE to Neutral (N)
Connect GREEN & YELLOW to Earth (E)
Connect BROWN to Live (L)
10 amp fuse to be used
If the colours of the wires in the mains lead of this appliance do not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows. The wire which is coloured
green and yellow MUST be connected to the terminal which is marked with the letter E (Earth)
or coloured green. The wire which is coloured blue MUST be connected to the terminal which is
marked with the letter N (Neutral) or coloured black. The wire which is coloured brown MUST be
connected to the terminal which is marked with the letter L (Live) or coloured red.
Before refitting the plug cover, check that there are no cut or stray strands of wire inside the plug.
Use a 10 amp BS1362 fuse. Only BSI or ASTA approved fuses should be used. If you are at all
unsure which plug or fuse to use, always refer to a qualified electrician.
Note: after replacing or changing a fuse on a moulded plug which has a fuse cover, the cover must
be refitted to the plug; the appliance must not be used without a fuse cover. If lost, replacement
fuse covers can be obtained from an electrical shop. This appliance complies with the following
EECDirectives:73/23EEC(LowVoltageDirective)and89/336EEC(EMCDirective).
RECYCLING YOUR ELECTRICALS
Along with many other high street retailers, Lakeland has joined a scheme whereby customers
can take their unwanted electricals to recycling points set up around the country.
Visit www.recycle-more.co.uk to find your nearest recycling point.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lakeland 16147 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lakeland 16147 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info