20377
106
Zoom out
Zoom in
Previous page
1/110
Next page
Glossary-1
Glossary
Cassette mode
This is an operation mode for the MP tray. When this mode is
used, approximately 100 sheets of plain paper can be fed
continuously, the same as for the cassette. The cassette mode
is specified as the factory setting, but you can change this
setting from the printer’s operator panel.
dpi (dots per inch)
This indicates the number of dots printed per inch, and is the
unit of printer resolution.
EcoPrint
This is a printing mode that controls toner consumption.
Pages printed in the EcoPrint mode are lighter than pages
printed in the normal mode. The default setting is Off.
Emulation
This refers to emulation of manufacturers’ printers. The
printer emulates operation of the following printers: PCL 6,
KC-GL, Line printer, IBM Proprinter, DIABLO 630, EPSON
LQ-850, and KPDL.
Expansion memory
This option is used to increase printer memory. The printer
has two expansion sockets, into both of which you can install
a 16 MB, 32 MB, 64 MB, or 128 MB DIMM (Dual Inline
Memory Module). See your Kyocera Mita dealer to purchase
the DIMM that is best suited for use with this printer.
First mode
This is an operation mode for the MP tray. If there is paper
inserted in the MP tray, all the paper will always feed from
there even if another paper source is selected.
IEEE1284
This is a standard used when connecting a printer to a
computer, and was established by the Institute of Electrical
and Electronic Engineers in 1994.
KIR (Kyocera Image Refinement)
This is Kyocera Mita’s original smoothing function. It uses
software to enhance the printer’s resolution and produce
high-quality printing. The default setting is On.
Kyocera Mita Digital Library
This is contained on the CD-ROM supplied with the printer.
The contents of the CD-ROM include manuals, printer
drivers, and various utilities.
KM-NET VIEWER
This is a network management tool that can be used with the
Kyocera Mita FS series. You can view information for
printers connected to the network using SNMP commands.
KM-NET VIEWER is contained on the Kyocera Mita Digital
Library CD-ROM supplied with the printer.
MB (mega byte)
This unit is used to express data quantities and memory
capacities. 1 MB is equivalent to 1024 kB, or 1,048,576 bytes.
MP tray
This is an abbreviation for Multi-Purpose tray. The MP tray
is used instead of the cassette when printing on envelopes,
postcards, transparency sheets, and labels.
Offline
The printer can receive data, but cannot print. Turn the
printer online if you want to print.
Online
The printer can output received data.
Operator panel
This is located on the top of the printer. The panel consists of
the message display, four indicators and eight keys. The
message display shows the printer’s status. Press the keys
when you want to switch the printer between online and
offline status, or to cancel printing.
Outline font
With outline fonts, characters’ outlines are represented by
numerical expressions, and fonts can be enlarged, reduced, or
painted in different ways by changing the numeric values of
those expressions. Printing remains clear even if you enlarge
fonts, since the letters are defined by an outline. You can
specify font size in steps of 0.25 points up to 999.75 points.
Parallel Interface
With this interface, data transfer between the printer and the
computer takes place on 8-bit chunks. The printer can
perform IEEE1284 compatible bi-directional
communications.
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS6020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS6020 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info