Manual Krups XP 4050 (page 6 of 9) (English)

111232

Zoom out

Zoom in

1/9

• If your espresso machine runs short of

water, a sonor signal and all leds blinking

incite you to fill the water tank.

• Your espresso machine switches to stand by

mode after 30 mn for energy saving and

switches off after 1H 30 of none use.

Maintenance

- Never wash your espresso machine

accessories in the dishwasher.

After use, the water tank must be emptied.

. Drip tray

This must be emptied after using the

appliance after taking off the grid (19). If

several espressos are being prepared one after

the other, the drip tray should be emptied

from time to time (about once every 7 - 8

espressos). The presence of water is normal

and does not signify a leak. If necessary, clean

the drip tray and its grid with water and a

little non-abrasive washing-up liquid, rinse

and dry. Replace it correctly (20).

. The brewing head, the filter and the

filter holder

These must be cleaned after each use. All you

need to do is wipe a damp cloth over the

brewing head of your appliance and to wash

the other accessories in water and a little non-

abrasive washing-up liquid, rinse and dry.

If the brewing head is heavily clogged up,

unscrew the grid, clean it and refit it, pressing

down firmly (21).

When your espresso is not being used, do not

leave the filter holder on the appliance to

prevent wear on the gasket.

. The cup warming plate: remove this to

clean it with water and a little non-abrasive

washing-up liquid, rinse and dry.

. The auto cappuccino accessory

For more thorough cleaning the auto cappuc-

cino accessory can be dismantled from the

appliance.

Clean it with water, a little non-abrasive

washing-up liquid and a small brush. Rinse

and dry it before refitting it.

Please note the direction of fitting the flexible

tube : engage the straight-cut end in the auto

cappuccino Accessory.

Descaling

• Descaling of your espresso should be done

fairly frequently with citric or tartaric acid.

• Due to the acid substance, we recommend

protecting your your worktop and sink unit

during the descaling process, especially if it

is made of marble or stone. Isolate your

espresso with a tea towel, a tablecloth or a

tray.

However, we would advise you to use the

Krups descaling accessory, reference F054,

which is available from Krups after-sales

service centres. This accessory includes, apart

from two descaling doses, a testing strip for

water hardness to assess the frequency of

descaling of your appliance in normal use.

Descaling depends on the hardness of the

water, but also on the use cycle. The

frequency of descaling indicated by the F054

accessory is thus given by way of indication

only.

- Then follow the following method:

• Unscrew the grid from the head of the

appliance and clean it (21).

• Dissolve a sachet of KRUPS descaling

accessory, reference F054, in half a litre of

lukewarm water and pour the whole

amount into the empty water tank.

• start the appliance (4).

• Place a container, as large as possible,

beneath the auto cappuccino accessory.

• As soon as the blue operating control lamp

glows continuously, the appliance is ready

• Pressing the hot water button

(15), run

through 1/3 of the liquid.

• Then, pressing the hot water button

(15)

to stop.

• Move the container under the brewing

head.

• Run the second third of the liquid

immediately by pressing the coffee button

(10) as many times as necessary.

XP 4050_Europe.P65 28/01/05, 13:5618

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups XP 4050 in the language / languages: English as an attachment in your email.

The manual is 1,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups XP 4050 Manual

Product: