111232

Krups XP 4050 Manual

4
Zoom out
Zoom in
Previous page
1/9
Next page
• Place one or two espresso cups beneath the
filter holder.
As soon as the control lamp on the coffee
buttons glows continuously, the appliance is
ready to operate.
Your appliance is already preprogrammed for
the preparation of one or two cups of
espresso.
• Pressing the coffee keys
or
(9) (10).
• At the beginning, there is a pre brewing
time lasting 2 or 3 seconds.
• When the programmed quantity is reached,
the espresso stops running automatically.
• Remove the filter holder and the filter from
the machine and take out the coffee
grounds (14).
The filter can be refilled to make more
espressos.
. WITH THE SPECIAL «ESE» FILTER
The E.S.E. system was designed for making
Italian-style espresso ristreto (squeezed). The
amount of coffee is 35 ml and the water
should take 20 seconds to run through.
(see Individual Programming to adjust volume)
«ESE», which stands for «Easy Serving
Espresso» , is a selected measure of coffee,
ground and pressed between two filter papers
making it ready for use. This system makes it
easy for you to prepare your espresso because
you avoid the measurement and tamping
down operations and it also makes it easier
for you to clean the appliance.
We do not intend, or recommend, that
the ESE servings are used for making a
long coffee.
We recommend that you take care, when
handling and storing the ESE servings, that
they do not become deformed.
For best results, we recommend that you pre-
heat the accessories (filter holder, filter and
cups) without any coffee. Do this as described
in the Making an Espresso using Espresso
Ground Coffee section.
. Preparing an espresso:
• Fill the water tank (1) (2) (3) and start the
appliance (4).
• Place the ESE serving in the ESE filter (18).
Tear excess paper from the pod at the
perforated edge. Place the ESE pod with the
RED MARKING FACE DOWN (bend the paper
corners down).
•Take care to put all the paper inside the filter
to avoid any drips.
Placing the ESE pod correctly will create a
richer, thicker crema.
• Put the filter holder in place (6) (7) (8) by
pressing it firmly to the right.
As soon as the control lamp on the coffee
buttons glows continuously, the appliance is
ready to operate.
• Press the coffee key
(9).
• At the beginning, there is a pre-brewing
time lasting 2 or 3 seconds.
• When the recommended quantity of coffee
has been reached (35ml), press the coffee
button
(9) if suitable volume was not
preprogrammed.
• Remove the filter holder from the brewing
head and throw away the used measure.
. Individual Programming:
Should you wish to alter the preprogrammed
quantity (50ml per cup, manufacturing
setting) of hot espresso filled into one or two
cups, proceed as follows:
• Fill the water tank (1) (2) (3) and start the
appliance (4).
• Put the filter for one or two cups into the
filter holder (5).
• Put one or two measures of ground coffee
into the filter with the measuring spoon and
tamp down using the measuring spoon (11)
(12) or a ESE pod in the ESE filter (18).
• Remove any ground coffee which is lying
around the filter (13).
• Replace the filter holder (6) (7).
• Place one or two cups beneath the filter
holder.
• As soon as the control lamp on the coffee
buttons glows continuously, the appliance is
ready to operate.
• Hold down either the one or two cups key
or
(9) (10) (for at least 3 sec) , the
two lamps (coffee key and operating control)
blink.
XP 4050_Europe.P65 28/01/05, 13:5616
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups XP 4050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups XP 4050 in the language / languages: English as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info