565309
19
Zoom out
Zoom in
Previous page
1/20
Next page
ENDE
FR
NLESPTITELDANOSVFI
17
ENGLISH
The milk froth is not fine enough. We recommend that you use fresh, pasteurised or UHT milk,
recently opened; it is also recommended that you use a cold
container. Check that the level of milk in the cold container is
sufficient.
Check that the steam spout is securely tightened onto the hose.
Clean the steam nozzle (refer to chapter 6.1 milk foam).
The Auto-Cappuccino accessory
does not suck the milk (accessory
sold separately).
Some parts of your appliance can sometimes be hot, take care
not to burn yourself; let the machine cool down before handling.
Check that the flexible inlet is not blocked, obstructed or twisted
and that it is securely fitted into the accessory to avoid any air
intake.
Check that the accessory is correctly fitted to the appliance,
remove and refit it.
Make sure that the accessory is set in the right position, either
cappuccino or latte. Remove and clean the accessory (refer to
chapter 6.2 auto cappuccino).
Clean the accessory with a steam cycle and a container filled with
water. You can use the KRUPS XS4000 liquid cleaner available as
an accessory.
If the problem persists replace the part (see photo in chapter 6.2
auto cappuccino, part circled) with the replacement one supplied
with your machine.
After filling the water tank, the
warning message is still displayed.
Check that the tank is fitted correctly onto the coffee
machine.
Check that the float at the bottom of the tank moves freely.
Rinse the tank and descale if necessary.
The cleaning or descaling pro-
gramme will not start.
Unplug the appliance for 20 seconds then switch it back on.
After emptying the used coffee
collector, the warning message is still
displayed.
Remove the collector, ensure that it is empty, wait for 6 seconds
and fit it back in place.
Check that the collector is pushed in correctly.
After washing the cleaning drawer,
the warning message is still
displayed.
Remove the drawer, wait for 6 seconds and fit it back in place.
Check that the cleaning drawer is pushed in correctly.
The power has been cut off during a
cycle.
The appliance resets itself automatically when the power is swit-
ched back on and is ready for a new cycle.
There is water or coffee under or at
the back of the appliance.
Before removing the tank, wait 15 seconds after the coffee has
finished running so that the machine can complete its cycle
correctly.
The drip tray has overflowed: empty it and clean the cleaning
drawer.
Check that the drip tray is properly positioned, even when the ap-
pliance is not in use.
A message “Error code XX”
appears.
Unplug the appliance for 20 seconds, remove the Claris cartridge
and if required, put it back into service.
If the fault persists, note the fault number and contact
KRUPS Customer Service.
When you turn off the appliance,
warm water will come out of the
coffee exits.
According to the type of recipe prepared, the machine can carry
out an automatic rinsing operation when it is turned off. This cycle
lasts only a few seconds and stops automatically.
Always ensure the drip tray is correctly fitted in place.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA8321 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA8321 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Krups EA8321

Krups EA8321 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 194 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info