565309
18
Zoom out
Zoom in
Previous page
1/20
Next page
KRUPS S
ERIE EA83xx
16
The coffee is too light or not strong
enough.
Check that the coffee bean tank has coffee in it and that it is flowing
correctly.
Avoid using oily, caramelised or flavoured coffee.
Reduce the volume of coffee using the central knob.
Turn the grinding fineness knob towards the left for a finer grind.
Prepare in two cycles using the 2 cup function.
The coffee flows too slowly. Turn the grinding fineness knob towards the right for a coarser grind
(may depend on the type of coffee used).
Carry out one or two rinsing cycles.
The coffee is not creamy enough. Turn the grinding fineness knob towards the left for a finer grind (may
depend on the type of coffee used).
Change the Claris Aqua Filter System cartridge (follow the installation
procedure on page 3).
Carry out one or two rinsing cycles.
The appliance does not serve any
coffee.
An incident has been detected during the preparation.
The appliance resets itself automatically and is then ready for a new
cycle.
You have used ground coffee
instead of coffee beans.
Use your vacuum cleaner to suck out the pre-ground coffee in the cof-
fee bean tank.
The grinder makes a strange noise. There are foreign particles in the grinder.
Contact KRUPS Customer Service.
The grinding fineness knob is hard to
turn.
Only change the grinder setting when it is operating.
The steam nozzle makes a noise
and/or does not work properly.
Clean your nozzle as indicated on P.10 figures and verify that it is well
placed on its corresponding end piece.
No steam is coming out of the steam
spout.
Some parts of your appliance can sometimes be hot, take care not to
burn yourself; let the machine cool down before handling.
Verify that the steam nozzle is correctly positioned on its corresponding
end piece. Verify that the steam nozzle is not blocked; if this is the case,
refer to the following paragraph. Empty the tank and temporarily
remove the Claris cartridge. Fill the tank with calcium rich mineral water
(>100 mg/l) and perform successive steam cycles (5 to 10) into a
container until you obtain a constant flow of steam. Re-insert the Claris
cartridge into the tank.
The steam nozzle of your machine
seems partially or completely
blocked or clogged.
You can remove end piece of the steam nozzle.
Some parts of your appliance can sometimes be hot, take care not to
burn yourself; let the machine cool down before handling.
Remove the pin and then remove the steam nozzle and carefully clean the
steam nozzle. If necessary, use the needle supplied with the steam
nozzle. Use hot water to remove any deposits and ensure that the hole
is not blocked by dried milk deposits or calcium.
Refit the steam nozzle and pin.
There is not enough milk froth. Refer to previous paragraph.
We recommend that you use fresh, pasteurised or UHT milk, recently
opened; it is also recommended that you use a cold container.
h
h
h
1
2
3
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA8321 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA8321 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Krups EA8321

Krups EA8321 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 194 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info