Manual Konig Electronic SEC-ALARM210 (page 5 of 151) (English, German, Dutch, French, Italian, Swedish, Spanish, Finnish)

508772

Zoom out

Zoom in

1/151

(A) Red marking on this side

(B) Magnet

After mounting the sensor, test it by opening and closing the door or window. The control centre should

respond in the same way as described in step 4.

Synchronising the motion detection sensor(s) to the control centre:

Before starting the process, first insert a 9 V alkaline battery (not included) into the battery

compartment.

Control centre will not respond to the motion detection sensor unless:

1) The control centre is armed in away mode (it will only respond to motion detection sensors in zones

1, 2 and 3)

2) Motion detection sensor is programmed into zone 4, which is a dedicated alert zone.

It is important to select which zone you program the motion detection sensor to. If you set up the

motion detection sensor for security purpose where it will cause an alarm with an intruder break-in,

you should program the motion detection sensor to either zone 1, 2 or 3. DO NOT program it to zone 4

as it is a dedicated alert zone. Sensors in this zone will not cause an alarm.

If you set up the motion detection sensor for alert purposes where it does not need to cause an alarm

when motion is detected, you should program the motion detection sensor to zone 4. DO NOT

program to Zone 1, 2, or 3, as motion detection sensors in these zones will not provide any alert

(A)

(B)

(C)

(A)

(B)

(C)

Test button

Indicator

underneath

the lens

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SEC-ALARM210 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Konig Electronic SEC-ALARM210 Manual

Product: