483683

Kinzo 72168 Manual

4
Zoom out
Zoom in
Previous page
1/52
Next page
4
A
5 ADDITIONAL SAFETY INSTRUCTIONS
• Do not place your hand over the air vents or block the vents in any way.
• The nozzle and accessories of this tool become extremely hot during use. Let these parts cool down before
touching.
• Always switch the tool o before putting it down.
• Do not leave the tool unattended while it is switched on.
• A re may arise if the appliance is not used with care
• Heat may be conducted to combustible materials hat are out of sight.
• Do not use in a damp atmosphere, where ammable gases may be present or near combustible materials.
• Allow the tool to cool fully before storing.
• Ensure adequate ventilation as toxic fumes may be produced.
• Do not use as a hairdryer.
• Do not obstruct either the air intake or nozzle outlet, as this may cause excessive heat build up resulting in
damage to the tool.
• Do not direct the hot air blast at other people.
• Do not touch the metal nozzle as it becomes very hot during use and remains hot for up to 30 minutes
after use.
• Do not place the nozzle against anything while using or immediately after use.
• Do not poke anything down the nozzle as it could give you an electric shock. Do not look down the nozzle
while the unit is working because of the high temperatures being produced.
• Do not allow paint to adhere to the nozzle or scraper as it could ignite after some time.
6 REMOVING PAINT
• Do not use this tool to remove paint containing lead. The peelings, residue and vapors of paint may
contain lead, which is poisonous. Any pre-1960 building may have been painted in the past with paint
containing lead and covered with additional layers of paint. Once deposited on surfaces, hand to mouth
contact can result in the ingestion of lead. Exposure even to low levels of lead can cause irreversible dam-
age to the brain and nervous system. Young and unborn children are particularly vulnerable.
• When removing paint, ensure that the work area is enclosed. Preferably wear a dust mask.
• Do not burn the paint. Use the scraper provided and keep the nozzle at leaf 25 mm away from the painted
surface. When working in a vertical direction, work downwards to prevent paint from falling into the tool
and burning.
• Dispose of all paint debris safely and ensure that the work area is thoroughly cleaned after completing the
work.
7 ASSEMBLY AND ADJUSTMENT
Prior to assembly and adjustment always unplug the tool
The air temperature can be adjusted to suit a wide range of applications. The table below suggests settings
for dierent applications.
Setting Applications
I - Drying paint and varnish.
- Removing stickers.
- Waxing en de-waxing.
- Drying wet timber prior to lling.
- Shrinking PVC wrapping and insulation tubes.
- Thawing frozen pipes.
II - Welding plastics.
- Bending plastic pipes end sheets.
- Loosening rusted or tightly fastened nuts and bolts.
II - Removing paint and lacquer.
- Soldering plumbing joints.
72168 Manual.indd 4 31-12-10 15:12
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kinzo 72168 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kinzo 72168 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 4,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info