483683

Kinzo 72168 Manual

3
Zoom out
Zoom in
Previous page
1/52
Next page
3
A
4.2 Electrical safety
Always check that the power supply corresponds to the voltage on the rating plate.
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodied plugs and matching outlets will reduce risk of electric
shock.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric
shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
4.3 Personal safety
• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a
power tool when you are tired or under the inuence of drugs, alcohol or medication. A moment of inat-
tention when operating a power tool may result in serious personal injury.
• Use safety equipment. Always wear eye protection. Using safety equipment such as a dust mask, non-skid
safety shoes, a hard hat, or hearing protection whenever it is needed will reduce the risk of personal injury.
• Avoid accidental starts. Ensure the switch is in the o position before inserting the plug. Carrying power
tools with your finger on the switch or plugging in power tools when the switch is in the on position
makes accidents more likely.
• Remove any adjusting keys or spanners before turning on the power tool. A spanner or key left attached to
a rotating part of the power tool may result in personal injury.
• Do not reach out too far. Keep your feet rmly on the ground at all times. This will enable you retain control
over the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from the
power tool. Loose clothes, jewellery or long hair can become entangled in the moving parts.
4.4 Power tool use and care
• Do not expect the power tool to do more than it can. Use the correct power tool for what you want to do.
A power tool will achieve better results and be safer if used in the context for which it was designed.
• Do not use the power tool if the switch cannot turn it on and o. A power tool with a broken switch is
dangerous and must be repaired.
• Disconnect the plug from the power source before making adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store power tools, when not in use, out of the reach of children and do not allow people who are not fa-
miliar with the power tool or these instructions to operate it. Power tools are potentially dangerous in the
hands of untrained users.
• Maintenance. Check for misalignment or jammed moving parts, breakages or any other feature that might
aect the operation of the power tool. If it is damaged, the power tool must be repaired. Many accidents
are caused by using poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less
likely to jam and are easier to control.
• Use the power tool, accessories and cutting tools, etc., in accordance with these instructions and in the
manner intended for the particular type of power tool, taking into account the working conditions and the
work which needs to be done. Using a power tool in ways for which it was not intended can lead to poten-
tially hazardous situations.
4.5 Service
Your power tool should be serviced by a qualied specialist using only standard spare parts. This will ensure
that it meets the required safety standards.
72168 Manual.indd 3 31-12-10 15:12
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kinzo 72168 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kinzo 72168 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 4,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info