512255

Kinzo 71788 X-Power 850W Manual

6
Zoom out
Zoom in
Previous page
1/60
Next page
6
A
8.2 Handle attachment (Fig. 4)
For reasons of safety, only use the hammer drill with handle attachment. You will be able to obtain a safe
body position when working by rotating the handle attachment. Loosen and turn the handle attachment in
an anti-clockwise direction: Then tighten the handle attachment.
FIG. 4
8.3 Depth stop (Fig. 5)
Loosen the handle attachment and place the straight part of the depth stop in the hole. Adjust the depth
stop and retighten the handle attachment.
FIG. 5
8.4 Dust collection device (Fig. 6)
Before carrying out hammer-drilling work vertically overhead pull dust collecting device over the drill bit.
FIG. 6
8.5 Drill Stop (Fig. 7)
You can deactivate the drilling action of the hammer drill when using it for chiselling work
• To do so, turn the drill stop (7) so that the mark (c) coincides with the arrow (a) on the machine case.
• To reactivate the drilling action, the drill stop (7) has to be reset so that the mark (b)coincides with the ar-
row (a).
FIG. 7
Important! When hammer drilling you will require a low pressure. Too much pressure will
place unnecessary load on the motor. Check the drill bits regularly. Re-sharpen or replace
blunt drill bits.
9 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power plug.
9.1 Cleaning
• Keep the ventilation slots of the machine clean to prevent overheating of the engine.
• Regularly clean the machine housing with a soft cloth, preferably after each use.
• Keep the ventilation slots free from dust and dirt.
71788 manual.indd 6 13-01-11 08:39
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kinzo 71788 X-Power 850W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kinzo 71788 X-Power 850W in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 4,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info