Manual Kinzo 71788 X-Power 850W (page 5 of 60) (English, German, Dutch, French, Polish)

512255

Zoom out

Zoom in

1/60

• Do not use in areas where there are vapours or ammable liquids.

• Always pull the plug out or the socket before cleaning or making changes to the machine.

• Protect the power cable from damage oil and acid can damage the cable.

• Never overload the machine.

• Secure all workpieces suciently.

• Important: It is imperative to follow all national safety regulations concerning installation, operation and

maintenance.

- Chisel bits and drill bits may be ung out of the machine accidentally and cause serious injury:

- Before starting to work, always check that the chisel or drill bit is properly locked in the chuck.

- Never start up a hammer tool until it is pressed against a workplace (wall, ceiling, etc.).

- When you are nished, unplug the hammer drill from the electric supply and remove the chisel or drill bit

from the machine.

- Always disconnect the hammer drill from the electric supply before you change a chisel or drill bit.

• Protect your eyes and other workers from ying particles and splinters. Wear a helmet! Set up partition

walls!

• Wear work gloves to protect ngers from bruising and grazing.

• Vibrations can injure the hand-arm system. Keep exposure to vibrations as short as possible.

• Always lead the mains cable away backwards from the device

• Store the device where it is inaccessible to children.

• When carrying out work, always hold the device with both hands and ensure that you have a stable

standing position.

7 BEFORE STARTING WORK

• Examine the place where the device is to be used for hidden electrical cables, gas and water pipes using a

pipe nding device.

• Before connecting to !he mains, ensure care that the mains voltage corresponds lo the details on the rating

plate.

7.1 Fitting and changing tools (Fig. 2)

The device is equipped with a SDS-plus attachment system.

• Clean tools and grease with a thin layer of machine grease before tting.

• Pull back fastening sleeve (A, g. 2) and hold.

• Push and rotate the dust-free tool into the tool holder as far as it will go, The tool will lock automatically.

• Check that it has locked by pulling the tool

FIG. 2

7.2 Removing SDS-plus tool (Fig. 3)

Pull back fastening sleeve (A), hold and remove tool.

FIG. 3

8 STARTING WORK (FIG. 1)

8.1 Switching ON/OFF

• Switching on: Press the operating switch (3).

• Switching o: Press the operating switch (3) briey and let go.

71788 manual.indd 5 13-01-11 08:39

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kinzo 71788 X-Power 850W in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 4,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kinzo 71788 X-Power 850W Manual

Product: