736098
16
Zoom out
Zoom in
Previous page
1/18
Next page
16
Der Bremswiderstand ist bei diesem Heimtrainer werkseitig korrekt einge-
stellt.
Nachstellen der Bremsbandspannung
Eine Korrektur durch Drehen an der Einstellschraube (Bild 1) des Gerätes
ist grundsätzlich möglich.
Drehung links (nicht möglich nach Werksauslieferung) = leichterer
Bremswiderstand
Drehung rechts = schwererer Bremswiderstand
Austausch des Bremsbandes
Muß das Bremsband gewechselt werden, beachten Sie folgende
Montageschritte:
Linken Pedalarm des Heimtrainers entfernen (mit Hilfe einer Schraube
M12x 40 abdrücken ), linke Haubenhälfte nach Lösen der Befestigungs-
schrauben und Herausdrehen der Sterngriffschraube abnehmen.
Schaltstellung 0 (Bild 2) am Verstellrad einstellen, Einstellschraube in
Endposition „leicht“ ( Drehrichtung Einstellschraube links ) bringen,
Bremsband lösen ( Bandführung für Austausch einprägen !! ) und austau-
schen.
Justieren des Bremsbandes
Gerät in Schaltungstellung 3 (Bild 3) an Einstellschraube justieren (Bild 1)
bis Federkörper exakt zwischen den Schnabel 49 mm der beigefügten
Meßlehre paßt (Bild 4). Pedalantrieb einige Male durchdrehen und
Kontrollmessung mit Meßlehre durchführen.
Heimtrainer in umgekehrter Reihenfolge wie oben beschrieben wieder
montieren.
(5) = ungenügende Bremsbandspannung
Prüfung und Einstellung der Bandspannung
D
1
4
5
3
3
0
2
The brake resistance of this home-trainer has been correctly adjusted by the
manufacturer.
Re-adjusting the brake belt tension
Basically, a correction is possible by turning the adjusting screw (Fig. 1) of
the device. Turning to the left (impossible after delivery from manufacturer)
= smaller brake resistance. Turning to the right = greater brake resistance.
Exchanging the brake belt
If the brake belt has to be exchanged, please pay attention to the following
assembly steps: Remove left pedal of home-trainer (push back by means of
a screw M12x40), take off left half of hood after loosening the fastening
screws and turning out the star grip screw. Adjust switching position 0 (fig.
2) at adjusting wheel, put adjusting screw into final position "small") (turning
direction of adjusting screw to the left), loosen the brake belt (recognise belt
Checking and adjusting of brake strap
GB
route for exchange!!) and exchange it.
Adjusting the brake belt
Adjust the device in switching position 3 (fig 3) at adjusting screw (fig. 1)
until the spring body exactly fits in between the jaws of the delivered mea-
suring gauge (49 mm) (fig. 4). Rotate pedal drive several times and perform
a control measure with the gauge.
Re-assemble the home-trainer in reverse order as described before.
(5) = insufficient brake belt tension
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Astor - 07939-980 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Astor - 07939-980 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Astor - 07939-980

Kettler Astor - 07939-980 User Manual - English - 16 pages

Kettler Astor - 07939-980 Installation Guide - English - 14 pages

Kettler Astor - 07939-980 User Manual - German - 16 pages

Kettler Astor - 07939-980 Installation Guide - German - 14 pages

Kettler Astor - 07939-980 User Manual - Dutch - 16 pages

Kettler Astor - 07939-980 Installation Guide - Dutch - 14 pages

Kettler Astor - 07939-980 User Manual - French - 16 pages

Kettler Astor - 07939-980 Installation Guide - French - 14 pages

Kettler Astor - 07939-980 User Manual - Italian, Polish, Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info