Manual Kenwood KTF 3010-2010 (page 18 of 20) (English)

473137

Zoom out

Zoom in

1/20

KTF-3010/KTF-2010 (En)

MW (AM) tuner section

Tuning frequency range.......................... 531 kHz ~ 1,602 kHz

Usable sensitivity

(at 30 % mod., S/N 20 dB) ....................12 µV/(400 µV/m)

Signal to noise ratio

(at 30 % mod., 1mV input).........................................50 dB

Total harmonic distortion................................................ 0.4 %

Image rejection ratio....................................................... 30 dB

Selectivity .........................................................................30 dB

Output level / impedance

(at 30 % mod., 1mV input)........................... 0.18 V/600 Ω

LW (for U.K. only) tuner section

Tuning frequency range............................. 153 kHz ~ 279 kHz

Usable sensitivity

(at 30% mod., S/N 20 dB) .......................................... 22µV

Signal to noise ratio

(at 30% mod., 1mV input)...........................................47dB

Total harmonic distortion................................................. 0.6%

Image rejection ratio........................................................27 dB

Selectivity .........................................................................33 dB

Output level/impedance

(at 30% mod., 1mV input)............................. 0.18 V/600 Ω

GENERAL

Power consumption..........................................................10 W

Dimensions .........................................W : 440 mm (17-5/16")

H : 94 mm (3-11/16")

D : 384 mm (15-1/8")

Weight (net)...................................................... 3.3 kg (7.26 lb)

FM tuner section

Tuning frequency range......................... 87.5 MHz ~ 108 MHz

Usable sensitivity (DIN)

MONO

..................1.3µV(75 Ω)/13.5 dBf(40 kHz dev., S/N 26 dB)

STEREO

...................50µV(75 Ω)/45.2 dBf(46 kHz dev., S/N 46 dB)

Limiting level (DIN) ................................ 1.0µV(75 Ω)/11.2 dBf

Total harmonic distortion (DIN at 1 kHz)

MONO................................ 0.08 % (85.2 dBf input, WIDE)

STEREO ............................... 0.2 % (85.2 dBf input, WIDE)

Signal to noise ratio

(DIN weighted at 1 kHz, 40 kHz dev.)

MONO............................................. 70 dB (85.2 dBf input)

STEREO .......................................... 65 dB (85.2 dBf input)

Stereo separation (DIN)

1 kHz ..............................................................50 dB (WIDE)

Capture ratio ...................................................... 2.0 dB(WIDE)

Selectivity (DIN ±300 kHz) .................................45 dB (WIDE)

(DIN± 200 kHz) ......................... 55 dB (NARROW)

Image rejection ratio (at 98MHz) ................................... 85 dB

IF rejection ratio (at 98MHz)......................................... 105 dB

Spurious rejection ratio (at 98MHz) ............................ 105 dB

AM suppression ratio ..................................................... 68 dB

Sub carrior suppression ratio (DIN)............55 dB (at 19 kHz)

65 dB (at 38 kHz)

Frequency response

(30 Hz ~ 15 kHz) ....................................... +0.5 dB, –1.5 dB

Output level / impedance (FM at 1 kHz, 75 kHz dev.)

Fixed ................................................................. 0.6 V/600 Ω

KTF-3010

1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed with-

out notice.

2. The full performance may not be exhibited in extremely coud location (under a water-freezing temperature).

Note

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KTF 3010-2010 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood KTF 3010-2010 Manual

Product: