473137
7
Zoom out
Zoom in
Previous page
1/20
Next page
KTF-3010/KTF-2010 (En)
7
Useful functions for broadcast reception
Each time the key is pressed, the operation mode changes.
When you press the ACTIVE RECEPTION key, the AR indicator
flashes, and the tuner will automatically switch the IF BAND, RF
ATT and ANT A/B functions to select the best conditions for recep-
tion. If, at this time, you change the receiving frequency by adjust-
ing the tuning UP/DOWN or calling up preset broadcast stations,
you will always achieve optimum broadcast wave reception.
Normally leave the ACTIVE RECEPTION mode ON.
During manual operation of IF BAND, RF ATT and ANT A/B func-
tions, the ACTIV RECEPTION mode is set to OFF.
AR
--
FM
One or the other lights
Light up when the
switch is turned on.
When there is an adjacent channel with strong radio waves, RF
reciprocal modulation, mixed modulation distortion easily occurs.
By switching the RF ATT key ON the RF reciprocal modulation
and mixed modulation can be minimized.
Even when the key is set to OFF, if the ACTIVE RECEPTION mode
is ON, it will work automatically.
This function lets you set the intermediate frequency pass band to
WIDE (wide band), or NARROW (narrow band).
WIDE: Normally set the IF BAND to WIDE. This setting allows
reception of good quality sound with minimal distortion.
NARROW: If signal reception is poor due to interference from a neigh-
bouring station when the IF BAND is set to WIDE, change
the IF BAND setting to NARROW.
If the ACTIVE RECEPTION mode is set to ON, WIDE or NARROW will
be switched over automatically.
TUNED
AUTO
MHz
STEREOANT A B
9 8)).
One or the other lights
When using 2 exterior antennas, or, an external antenna with an
already established antenna (cable broadcast reception antenna
etc.), aligning to the respective set up and reception statuses, A
or B can be switched.
If the ACTIVE RECEPTION mode is set to ON, the key will switch A/
B automatically.
By pressing this key, the automatic stereo function and the auto-
matic tuning function are both switched over at the same time
when AUTO STEREO or HIGH BLEND (available with KTF-3010 only)
is selected.
TUNED
AUTO
MHz
STEREOANT A
8 9)).
Lights up in the AUTO mode.
AUTO/STEREO (STEREO lit during stereo reception):
Usually, set the switch to AUTO/STEREO.
The tuner automatically switches between stereo and monaural
receptions according to the program being received.
The tuner automatically scans the frequency and stops when a
station is tuned in.
HIGH BLEND (available for the FM band with KTF-3010 only):
STEREO lit during stereo reception
This function reduces audible noise in the middle band and above
when receiving weak radio waves during stereo broadcasts. The
tuner automatically scans the frequency and stops when a sta-
tion is tuned in.
MANUAL/MONO:
Set the switch to OFF when noise interferes due to weak radio
waves in the stereo reception. The stereo broadcast is received in
monaural and the noise will be reduced. When you want to tune
in a station with weak radio waves which the auto tuning func-
tion can not pick up, select the manual tuning mode.
IF BAND key (KTF-3010 only /available for the
FM band only)
RF ATT key (KTF-3010 only /available for the
FM band only)
TUNING MODE key (KTF-3010)
AUTO/MANUAL key (KTF-2010)
ANT A/B key (KTF-3010 only /available for the
FM band only)
Flashes, then lights
ACTIVE RECEPTION (A.R) key (KTF-3010 only/
available for the FM band only)
ACTIVE
RECEPTION
HIGHBLEND
WIDE
NARROW
RFATT
IF BAND
HIGHBLEND
WIDE
NARROW
RFATT
RF ATT
ANT A
/
B
Each press switches the turning methods as follows:
1 AUTO/STEREO : AUTO lit (auto tuning)
2 HIGH BLEND : AUTO lit, HIGH BLEND LED lit
(auto tuning)
3 MANUAL/MONO: AUTO not lit (manual tuning)
FM
1 AUTO : AUTO lit (auto tuning)
2 MANUAL/MONO: AUTO not lit (manual tuning)
MW/
LW
AUTO/MANUAL
TUNING
MODE
KTF-3010
KTF-2010
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KTF 3010-2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KTF 3010-2010 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info