463563
3
Zoom out
Zoom in
Previous page
1/128
Next page
to use your food
chopper
The knife blade unit comes in 2
p
arts, a lower and an upper blade.
F
or coarser chopping use the lower
blade on its own.
For finer chopping or pureeing use
both blades together. This will also
give a faster result. To use both
blades fit the upper blade onto the
lower blade and turn anti-clockwise
to locate in place . Take care as
the blades are sharp.
Note: After processing food, the
upper blade may disengage from the
lower blade. This is normal as the
blade assembly is designed to be
loose fitting to ease separation after
use.
1 Fit the bowl onto the power unit,
then turn clockwise to lock into
place .
2 Fit the blade assembly into the bowl.
Always fit the bowl and blade
assembly onto the food chopper
before adding ingredients.
3 Cut the food into suitably sized
pieces and place in the bowl. Larger
pieces of food should be cut into
approximately 1 to 2 cm pieces.
4 Fit the lid and turn clockwise to lock
into place .
5 Connect to the power supply and
press down on the speed selector to
select the desired speed .
Press the speed selector lightly to
obtain speed 1.
Press the speed selector firmly to
obtain speed 2.
Alternatively the speed selector may
be pressed down for short periods
of time to produce a pulsing action.
This can be used to avoid over
processing food.
6 Operate the food chopper until the
desired result is achieved.
7 Reverse the above procedure to
dismantle the unit.
Always unplug the food
c
hopper before removing the
l
id.
important
If preparing food for babies or young
c
hildren, always check that the
ingredients are thoroughly blended
before feeding.
Do not run the food chopper
continuously for longer than
30 seconds. Leave to cool for
2 minutes in between each
30 second operation.
Do not operate the food chopper if
the bowl is empty.
Always allow hot food to cool before
processing.
Do not exceed the maximum
capacities stated or fill above the
400ml level marked on the bowl.
Do not place any part of the
chopper in the microwave.
hints
If the chopper labours, remove some
of the mixture and continue
processing in several batches,
otherwise you may strain the motor.
Remember that chopping hard foods
such as coffee beans, spices,
chocolate or ice will wear the knife
blades faster.
Beware of over processing some
ingredients. Stop and check the
consistency frequently.
Various spices such as cloves, dill
and cumin seeds can have an
adverse effect on the plastic of your
food chopper.
To ensure even processing, stop and
scrape down any food from the side
of the bowl with the plastic spatula
supplied.
The best results are obtained by
chopping small quantities at one
time.
Cut larger pieces of food into 1-2cm
pieces. A large load or large pieces
may cause uneven results.
3
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood CH250 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood CH250 series in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info