686270
17
Zoom out
Zoom in
Previous page
1/26
Next page
EN
Arc dynamics
In Manual mode you can select from two dierent arc dynamics settings. Press Manual mode
button (Arc Dynamics control on MinarcMig 170 model) once to pre-select either arc dynamic
value I or value II. Changing between setting I and setting II will adjust the short circuit
characteristics to suit dierent welding applications.
2.8.5 Adjustments in manual mode
In manual mode, the wire feed speed and welding voltage are both adjusted separately.
Welding current and power are dened according to wire feed speed. The desired arc and
welding properties can be reached by adjusting the voltage.
2.9 MIG/MAG welding
NOTE! Welding fumes may be dangerous to your health. Ensure that there is ample ventilation
during welding! Never look at the arc without a face shield specically designed for arc welding!
Protect yourself and your surrounding area from the arc and hot welding spatter!
NOTE! Always wear protective clothing, gloves, face and eye shields suitable for welding. It is
recommended that you make practice welds before you commence welding your main work piece.
NOTE! The work piece will be very hot. Protect yourself and others at all times.
You can start welding after you have made the necessary preparation described throughout
these instructions.
Providing you ensure that the MinarcMig Evo equipment is correctly prepared and set for
the material type and joint to be welded, you will achieve exceptionally high quality welding
results.
• Ensure that the correct ller wire type and size is selected for the work piece.
• Ensure that the correct wire liner and contact tip size is tted to the welding gun.
• Ensure that the correct shielding gas type is connected and the ow rate adjusted before
welding starts.
• Ensure the earth return clamp is connected to the work piece
• Ensure that you are wearing the correct safety equipment before you start welding
- including: suitable welding clothing, the correct welding face shield with a suitable
shade welding lens, welding gloves and when necessary, a welding mask.
NOTE! Please read section 1.2.2 before proceeding further.
15
© Kemppi Oy / 1340
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi MinarcMig Evo 170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi MinarcMig Evo 170 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kemppi MinarcMig Evo 170

Kemppi MinarcMig Evo 170 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info