686270
15
Zoom out
Zoom in
Previous page
1/26
Next page
EN
2.8.1 Display in automatic mode
1.
2.
4.
5.
7.
6.
3.
Machine display in automatic mode
1. Material thickness
2. Visual material thickness and weld shape indicator
3. Operating mode reference
4. Material selection
5. Shielding gas and wire diameter recommendation
6. Wire feed graphic
7. Welding values: Wire feed speed, welding voltage and welding current
MinarcMig Evo 200 automatically sets the machine based on your input selections for plate
thickness in mm, weld shape and material type. The material thickness graphic display shows
the selected plate thickness to be welded. Your machine is automatically set for welding
following these parameters inputs.
As you make your selections you will see the displayed parameters change. For example,
as you adjust the power/plate thickness control, you will see the graphic indicating plate
thickness become thicker or thinner.
The selected operating mode and material type are also shown on the display. The display
also shows a recommendation for shielding gas and ller wire diameter for the material in
question. During welding, the graphical display shows that wire feeding is active including
the wire feed rate. Of all the welding parameters, only ller wire feed speed is visible on the
display all the time. Welding voltage and welding current are only visible on the display during
welding. The last used values remain on the display until welding is restarted or parameter
settings are changed.
When adjusting the arc length, weld shape, or voltage control, the voltage display shows
a comparative scale (-9…0…9) which will disappear from the display after a preset time
following adjustment.
2.8.2 Welding power adjustment in automatic mode
Adjusting the welding power according to sheet thickness aects simultaneously both wire
feed speed and amount of current delivered to the ller wire. This is a good starting point
for welding in dierent operating situations. However, welding joint type and root opening
may inuence the amount of welding power required. Select the correct welding power
using the power control, whilst viewing the graphical display of the llet weld and sheet
thickness indicator. If the llet weld’s sheets are of dierent thickness, use their average as a
default parameter and test weld. The sheet thickness display is given in millimetres and with
steel and stainless steel wires, is based on 0.8 mm ller wire diameter. When using a 0.6 mm
ller wire, set the welding power control slightly higher than the used sheet thickness and
correspondingly slightly lower with 0.9–1.0 mm wires. With aluminium wires, the welding
power adjustment is based on 1.0 mm wire diameter.
13
© Kemppi Oy / 1340
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi MinarcMig Evo 170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi MinarcMig Evo 170 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kemppi MinarcMig Evo 170

Kemppi MinarcMig Evo 170 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info