686373
15
Zoom out
Zoom in
Previous page
1/18
Next page
15
Robot Gun Mount T2, T4© Kemppi Oy 2017 1712
OPERATING MANUAL
16. TROUBLESHOOTING
Risk of injury due to unexpected start-up
For the entire duration of maintenance, servicing, unmounting, and repair work, the
following instructions must be adhered to:
Switch o the power supply.
Cut o the compressed air supply.
Pull the power plug.
In the event of any doubts or problems, please contact your retailer or the manufacturer.
Please also consult the operating instructions for the other welding components,
such as the power supply and air pressure line.
Problem Cause Solution
Robot gun mount cannot
be attached
Wrong gun mount used Use the correct gun mount
Robot Gun Mount T2 mounting ange is defective Send the robot mount for repair
Robot Gun Mount T2 does
not activate the stop signal
Cable not connected between the robot mount and the
cable assembly
Connect the cable
Cable defective Replace the cable
Robot gun mount switch defective Send the robot mount for repair
Robot Gun Mount T2
does not reset to the zero
position
Mounted load is too heavy Reduce the mounted load
Mechanical defect Observe the data provided by the manufacturer
Attachment parts (bracket etc.) not correctly connected Send the robot mount for repair
Check whether the attachment parts are properly connected
Robot Gun Mount T2
triggered when there is no
fault
Mounted load is too heavy
Robot speed is too high
Adapt the load to the specications
See Chapter 6
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 Robot Gun Mount T4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 Robot Gun Mount T4 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info