686373

Kemppi A7 Robot Gun Mount T4 Manual

10
Zoom out
Zoom in
Previous page
1/18
Next page
10
Robot Gun Mount T2, T4© Kemppi Oy 2017 1712
OPERATING MANUAL
11. FUNCTIONAL DESCRIPTION
The holding force of the inserted springs is directly applied to the release ange
and xes the switching axis, which is positioned by three pins, in the zero position.
In the event of collision, the switching axis tips over, the release ange pushes the
spring plate toward the base of the housing, and the trigger is actuated by the
spring plate’s actuating mechanism. The applied switching voltage is interrupted.
Figure 5: Functional diagram
M8×1 M9×0.5
3
1
2
3 Signal1
2 24 V2
1 GND3
1. 3-pole ange plug
2. Microswitch triggered
3. Microswitch in resting position
8. DELIVERY SCOPE
The delivery for a gas-cooled gun includes the following components:
• Kemppi Robot Gun Mount T2 or T4
• Operating instructions
• Cylinder-head screws, M4×55 (6 pcs.)
• Certicate of conformity
• Connection cable
The equipment parts and wear parts are ordered separately.
Order data and ID codes for the equipment parts and wear parts can be found in the
current catalogue. Contact details for advice and for placing orders can be found
online at www.kemppi.com.
9. TRANSPORT
The components are carefully checked and packed; however, damage may still occur
during shipping.
Checking procedure on
receipt of goods
Check that the shipment is correct by referring to the
shipping note.
In case of damage
Check the package and components for damage (perform
a visual inspection).
In the event of problems
If the goods have been damaged during transport, contact
the last carrier immediately. Keep the packaging (for
possible checks by the carrier).
Packaging for return of
the goods
Use the original packaging and the original packaging
material. If you have questions about the packaging and
safety during shipment, please consult your supplier.
10. STORAGE
The physical conditions for storage in a closed room are -10 °C to 55 °C.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 Robot Gun Mount T4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 Robot Gun Mount T4 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info