522389

Katadyn REPAIR SEAL KIT Survivor 35 Manual

1
Zoom out
Zoom in
Previous page
1/10
Next page
INSTALLATION INSTRUCTIONS
REPAIR SEAL KIT
Survivor 35
Print No.: 8013308/1 Katadyn North America Inc. Katadyn Products Inc.
4830 Azelia Avenue North Pfäffikerstrasse 37
Minneapolis, MN 554429 U.S.A. 8310 Kemptthal Switzerland
Tel +1 800 755 6701 Fax +1 763 746 3540 Tel +41 44 839 21 11 Fax +41 44 830 21 99
marine@katadyn.com www.katadyn.us info@katadyn.ch www.katadyn.ch
PURPOSES OF THE KIT
Over time, the dynamic seals and O-rings in the PowerSurvivor-35 and Survivor-35 will wear. The
Repair Seal Kit contains the major seals and O-rings that should be replaced to improve operating
efficiency. It also contains new check valve poppets and springs, which should be replaced at the same
time.
CONTENTS OF THE KIT
Refer to the illustrations on Pages 6-8, showing the parts included in the kit.
TOOLS REQUIRED
Needle-nose pliers
¼-in. Allen wrench (Survivor-35 only)
5/32-in. Allen wrench
½-in. open-end wrench
(PowerSurvivor-35 only)
Standard-blade screwdriver)
DISASSEMBLY
Remove Membrane Assembly from Pump
1. Grasp the membrane housing with both hands and turn counterclockwise until it can be removed.
2. Remove the membrane element with a pulling-and-twisting motion.
Remove Pump from Drive Housing
(PowerSurvivor-35)
1. Pull the tubing off the two hose barbs
on the drive end of the pump.
2. Slide back the rubber cap, and pull or
tap out the pin which connects the
pump shaft and motor drive shaft.
3. With a ½-in. wrench, remove the four
drive housing nuts. Pull the pump from
the drive housing. Remove the rubber
cap from the piston shaft.
1 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Katadyn REPAIR SEAL KIT Survivor 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Katadyn REPAIR SEAL KIT Survivor 35 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info