464668

Jumbo XXL-Universal-Fernbedienung Manual

3
Zoom out
Zoom in
Previous page
1/8
Next page
UNIVERSAL REMOTE CONTROL
OPERATING INSTRUCTIONS
This 6 in 1 universal remote control replaces up to six remote controls
and is compatible with almost all major brand devices.
It can be used to operate the following types of device
TV: television set
VCR: video recorder
DVD: DVD player
CABLE: cable receiver
SAT: Satellite receiver
AUDIO: audio devices
Please read these instructions carefully before using the remote control
for the first time.
We recommend to start with the automatic channel scan.
Note:
a) When replacing the batteries, do not press any buttons. Otherwise
the programmed settings and codes may change.
b) Reset all commands before starting the programming. To reset,
press (SET)+(TV) and enter (9) (9) (0). The reset is successfully
completed when the LED flashes three times.
Your universal remote control is capable of performing the most
common functions of device remote controls.
- Please note that in some cases the universal remote control cannot
perform all special functions of a device remote control.
- At the end of this guide you will find device codes for many types of
equipment. Please note, however, that there may be devices which
cannot be operated with this universal remote control.
Intended Use
The universal remote control is used to operate consumer electronics
devices and is designed for indoor use in private homes. It is intended
exclusively for these purposes and must not be used for any other
purpose. It must only be used as described in these operating
instructions. Any other use is considered incorrect and may result in
damage to the remote control or the equipment.
Inserting batteries
The battery compartment is located on the back of the universal remote
control.
Insert two size AA batteries (LR6, 1.5 V) in the battery compartment and
pay attention to polarity (+/- poles). Press the ON/OFF button. The
universal remote control works properly when the red LED light comes
on.
Caution!
If you replace the batteries, all codes stored by the universal remote
control will be deleted. For this reason, write down the codes used for
programming before replacing the batteries.
Remove the batteries from the universal remote control if you do not
use it for a longer period.
5
Overview:
Red LED flashes during operation and is constantly lit during
programming
Switching the device on and off
Setting the device to mute
Teletext buttons. Use these buttons like the teletext buttons on
your TV remote control
Switching on teletext
Switching off teletext
Teletext page on hold (within a sequence of continuous pages)
Volume up (+), volume down (-)
Changing TV channels up (CH+) or down (CH-)
INPUT TV/VCR. Use this button like the AV button on your TV
set. Press the button several times to select the input source (
"AV1", "AV2", etc.)
For calling up the menu of the respective device
Play buttons. Use these buttons to control the playback functions
of the selected device (e. g. VCR, DVD player, DVD recorder)
SKIP backwards
Press to start playback
SKIP forward
Press to start recording
Press to stop playback
Press to pause playback
OK: Press to confirm an entry
Number buttons. Press to select a TV program or to make a
numeric entry.
Coloured buttons. Use these buttons for teletext. Use the red
button to perform the function that is displayed within a red box,
etc.
Device buttons. The device codes are assigned to these buttons.
Applies only to TV set.
VCR, SAT, DVD, CAB, AUD: For other devices
1:
2:
3:
4:
a:
b:
c:
5:
6:
7:
8:
9: SET: Setup
10:
II
11:
12:
13:
14.
TV:
VCR
TV
SAT
DVD
CAB AUD
1
2
3
4
5
6
6
7
9
OK
0
7
INPUT
TV-VCR
MENU
SET
VOL
+
VOL
-
CH
+
CH
-
1
2
3
4abc
5
6
8
9
7
10
4abc
b
a
c
11
12
13
14
6
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jumbo XXL-Universal-Fernbedienung at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jumbo XXL-Universal-Fernbedienung in the language / languages: German as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info