28350
68
Zoom out
Zoom in
Previous page
1/404
Next page
2-8
2
Radar interference reflector function selection
Turns on and off the radar interference reflector (IR). The IR is turned on or off each time this
switch is clicked.
Radar reception scale (GAIN)
This indicates the degree the knob has been turned.
Sea clutter suppression function (SEA) selection
Selects either manual or automatic sea clutter suppression. The bar on the right indicates the
position in the manual mode.
Sea scale
This indicates the amount the knob has been turned in manual mode. When in auto
mode,“AUTO”will be displayed.
Rain/snow clutter suppression function (RAIN) selection
Selects either manual or automatic rain/snow clutter suppression. The bar on the right
indicates the position in the manual mode.
Rain scale
This indicates the amount the knob has been turned in manual mode. When in auto mode,
“AUTO”will be displayed.
Own ship’s trail indication interval function (TRACK) selection
Turns on and off the own ship’s trail indication interval.
Radar trail indicator function (TRAILS) selection
Sets the time intervals for radar trails. OFF, 0.5MIN, 1MIN, 3MIN, or 6MIN can be selected.
Image processing function (PROC) selection
Sets the image processing mode. OFF, PROC1, PROC2 or PROC3 can be selected.
Radar trail mode selection
Sets true trail or relative trail when operating the radar trail function.
“T” is displayed when true trails are used and “R” is displayed for relative trails.
This setting is also limited by the radar bearing mode.
When the North-up (N UP) mode is used, switching between “T” and “R” is possible.
When the Course-up (C UP) mode is used, only “T” is set.
When the Head-up (H UP) mode is used, only “R” is set.
Radar image enhance (ENH) function selection
Turns on and off the radar image enhance function. It is turned on or off each time this switch is
clicked.
Cursor mode selection
Sets the cursor mode. Clicking this button will display a pull-down menu. After setting the
mode, the cursor can be moved and the left trackball button used to make various settings.
Because all the modes are to be used during radar transmission, a mode may not operate
properly if it is selected in the standby state.
Off center mode selection
This has the same function as the [OFF CENT] switch. Shifts the own ship position within the
screen (within 60% of the scope’s radius) to display a wider range in an arbitrary direction.
When this button is pressed when the system is already in the off center mode, then the off
center function will be turned off.
21
22
23
24
25
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC JMA9933SA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC JMA9933SA in the language / languages: English as an attachment in your email.

The manual is 7,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info