626531
1
Zoom out
Zoom in
Previous page
1/4
Next page
enjoy motors ®
JE 50 RA 916 radio motor is a product from Jolly Motor España, s.l. www.enjoy-motors.com 1
JE50RA-916-STEEL_eng_ver. REM 2 & REM 2T
INSTRUCTIONS: how to program a radio motor or how to replace an old transmitter
ELECTRONIC TUBULAR MOTOR build in receiver ers916 “JE50 RA9”
JE50 RA9
! VERY IMPORTANT: BEFORE TO START ...
PLEASE VERIFY IN ADVANCE, WHICH IS THE VERSION OF YOUR MOTOR.
AFTER THAT, PROCEDED AS THE NEXT DIAGRAM TO CHANGE AN OLD
TRANSMITTER OR TO START WITH THE RIGHT PROCEDURE IN EACH CASE
YOU CAN FIND THE VERSION ON THE MOTOR HEAD LABEL
REM 2 916
Rev. 1.4
or previous
REM 2T 916
Rev. 1.5
or later
REM 2 916
Rev. 1.4
or previous
MOTOR IS INSTALLED
(it has its limit switch set up)
MOTOR IS NOT INSTALLED
(it hasn’t its limit switch set up)
ORIGINAL
TRANSMITTER
• doesn’t work
• it is missing
ORIGINAL
TRANSMITTER
• is working
IT HASN’T
ASSOCIATE A
TRANSMITTER
IT HAS
ASSOCIATE A
TRANSMITTER
• it works
• it doesn’t work
• it is missing
ORIGINAL
TRANSMITTER
REPLACEMENT
(9.1)
COPY STEEL
using the
original one
(7)
ASSOCIATE
THE FIRST
TRANSMITTER
(2)
ORIGINAL
TRANSMITTER
REPLACEMENT
(9.1)
PRECEDENT LIMIT SWITCHES
REMAIN WORKING
ON THE MOTOR
ENTRY ON PROGRAM MODE
TO CONTINE
(5)
DOWN LIMIT SWITCH set up
(4.1)
UP LIMIT SWITCH set up
(4.2)
MID POINT set up
(6)
MOTOR WORKS PROPERLY WITH
STEEL TRANSMITTER
MOTOR WORKS PROPERLY WITH
STEEL TRANSMITTER
REM 2T 916
Rev. 1.5
or later
MOTOR IS INSTALLED
(it has its limit switch set up)
MOTOR IS NOT INSTALLED
(it hasn’t its limit switch set up)
ORIGINAL
TRANSMITTER
• doesn’t work
• it is missing
ORIGINAL
TRANSMITTER
• is working
IT HASN’T
ASSOCIATE A
TRANSMITTER
IT HAS
ASSOCIATE A
TRANSMITTER
• it works
• it doesn’t work
• it is missing
ORIGINAL
TRANSMITTER
REPLACEMENT
(9.1)
COPY STEEL
using the
original one
(7)
ASSOCIATE
THE FIRST
TRANSMITTER
(2)
ORIGINAL
TRANSMITTER
REPLACEMENT
(9.2)
PRECEDENT LIMIT SWITCHES
REMAIN WORKING
ON THE MOTOR
ENTRY ON
PROGRAM
MODE
TO CONTINE
(5)
DOWN LIMIT SWITCH set up
(4.1)
UP LIMIT SWITCH set up
(4.2)
MID POINT set up
(6)
MOTOR WORKS PROPERLY
WITH STEEL TRANSMITTER
MOTOR WORKS PROPERLY WITH
STEEL TRANSMITTER
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jolly Motor JE50 RA9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jolly Motor JE50 RA9 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info