Manual JBL DSC 1000 (page 9 of 100) (English)

507359

Zoom out

Zoom in

1/100

If there is no sound from any of

the speakers:

• Check that receiver/amplifier

is on and a source is playing.

• Check that the powered

subwoofer is plugged in, its

Power switch

is switched

on to the “ON•” position.

• Check all wires and

connections between

receiver/ amplifier and

speakers. Make sure all wires

are connected. Make sure

none of the speaker wires are

frayed, cut or punctured.

• Review proper operation of

your receiver/amplifier.

If there is no sound coming

from one speaker:

• Check the “Balance” control

on your receiver/amplifier.

• Check all wires and con-

nections between receiver/

amplifier and speakers. Make

sure all wires are connected.

Make sure none of the

speaker wires are frayed, cut

or punctured.

• In Dolby Digital or DTS

modes, make sure that the

receiver/processor is

configured so that the

speaker in question is

enabled.

If there is no sound from the

center speaker:

• Check all wires and

connections between

receiver/

amplifier and speaker. Make

sure all wires are connected.

Make sure none of the

speaker wires are frayed, cut

or punctured.

• If your receiver/processor is

set in Dolby Pro Logic mode,

make sure the center speaker

is not in phantom mode.

• If your receiver/processor

is set in Dolby Digital or DTS

mode, make sure the

receiver/processor is con-

figured so that the center

speaker is enabled.

If the system plays at low

volumes but shuts off as

volume is increased:

• Check all wires and connecti-

ons between receiver/

amplifier and speakers. Make

sure all wires are connected.

Make sure none of the

speaker wires are frayed, cut

or punctured.

• If more than one pair of main

speakers is being used, check

the minimum impedance

requirements of your

receiver/amplifier.

If there is low (or no) bass

output:

• Make sure the connections to

the left and right “Speaker

Inputs” have the correct

polarity (+ and –).

• Make sure the subwoofer is

plugged into an active

electrical outlet.

• Make sure the powered

subwoofer is plugged in and

switched on.

• In Dolby Digital or DTS

modes, make sure your

receiver/processor is

configured so that the

subwoofer and LFE output are

enabled.

If there is no sound from the

surround speakers:

• Check all wires and

connections between

receiver/ amplifier and

speakers. Make sure all wires

are connected. Make sure

none of the speaker wires are

frayed, cut or punctured.

• Review proper operation of

your receiver/amplifier and its

surround-sound features.

• Make sure the movie or TV

show you are watching is

recorded in a surround-sound

mode. If it is not, check to see

if your receiver/ amplifier has

other surround modes you

may use.

• In Dolby Digital or DTS

modes, make sure your

receiver/processor is

configured so that the

surround speakers are

enabled.

• Review the operation of your

DVD player and the jacket of

your DVD to make sure that

the DVD features the desired

Dolby Digital or DTS

mode,

and that you have properly

selected that mode using both

the DVD player’s menu and

the DVD disc’s menu.

TROUBLESHOOTING

17214 SCS140_146 DSC Multi OM 29/07/03 15:46 Side 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JBL DSC 1000 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JBL DSC 1000 Manual

Product: