675574
9
Zoom out
Zoom in
Previous page
1/12
Next page
9
www.jbl.com
English
Input and Output
Audio inputs : 1 Analog, 1 Optical,
Bluetooth, USB
HDMI Video Inputs : 3
HDMI Video Output
(with Audio Retur
n Channel) : 1
HDMI HDCP Version : 2.2
Bluetooth specication
Bluetooth Version : 4.2
Max Bluetooth Range : 32 ft (10m)
Bluetooth Prole : A2DP V1.3 / AVRCP V1.6
USB specication
(USB) port: Type A
File Format Type Compatibility list:
Extension Codec
Sampling
Rate
Bitrate
*.mp3
MPEG 1
Layer2
16KHz ~
48KHz
80kbps~320kbps
MPEG 1
Layer3
16KHz ~
48KHz
80kbps~320kbps
MPEG 2
Layer3
16KHz ~
48KHz
80kbps~320kbps
MPEG 2.5
Layer3
16KHz ~
48KHz
80kbps~320kbps
*.wav -
16KHz ~
48KHz
up to 3000kbps
Product dimension and weight
Soundbar Dimensions (W x H x D) : 1018 x 58 x 78 (mm) \
40"x2.3"x3"
Soundbar Weight : 2.3kg \ 5.1lbs
Subwoofer Dimensions (W x H x D) : 440 x 305 x 305 (mm) \
16" x 12" x 12"
Subwoofer Weight : 12.1kg \ 26.7lbs
Packaging Dimensions (W x H x D) : 1097 x 365 x 450 (mm) \
43.2" x 14.4" x 17.7"
Packaging Weight (Gross) : 17.85kg \ 39.4 lbs
Wireless transmitter/receiver section
Bluetooth Frequency Range : 2402MHz-2480MHz
Max Transmitting power : 9dBm (EIRP)
Bluetooth Transmitter modulation : GFSK, π/4 DQPSK,
8DPSK
5.8G Wireless Frequency Range : 5740MHz-5840MHz
5.8G Max Transmitting power : 20dBm (EIRP)
10. TROUBLESHOOTING
If you have problems using this product, check the following points
before you request service.
System
The unit will not turn on.
Check if power cord is plugged into the outlet and the soundbar
Sound
No sound from Soundbar.
Make sure that the soundbar is not muted.
On the remote control, select the correct audio input source
Connect the audio cable from your soundbar to your TV or other
devices.
However
, you do not need a separate audio connection
when:
the soundbar and TV are connected through HDMI ARC
connection, or
a device is connected to the HDMI IN connector on your
soundbar.
Reset your soundbar to its factory settings via press and hold
VOLUME -, VOLUME+ and SOURCE button on soundbar top
panel
Sound is strange after sound setting adjustment
Reset audio setting by press and hold SOUND button on remote
control for 5 seconds
No sound from the wireless subwoofer.
Check if the Subwoofer LED is in solid white colour. If white LED
is blinking, connection is lost. Manually pair the Subwoofer to
soundbar (see ‘Pair with the subwoofer’ on page 4).
Distorted sound or echo.
If you play audio from the TV through the soundbar, make sure
that the TV is muted.
Audio and video are not synchronized.
Press AUDIO SYNC +/- to synchronize the audio with the video.
Error message is displayed on the display panel.
When “ERROR” is displayed, it indicates that an input audio
format is not supported.
When “ERROR” is displayed in USB source, it indicates that the
connected USB device or Audio le is not supported
Video
If there is no picture on the TV Screen
Check that the soundbar power is ON, the intended source is
ON, and the input is set correctly on the soundbar.
Bluetooth
A device cannot connect with the Soundbar.
You have not enabled the Bluetooth function of the device. See
the user manual of the device on how to enable the function.
The soundbar is already connected with another Bluetooth
device. Press and hold BT button on your remote control to
disconnect the connected device, then try again.
Turn off and turn off your Bluetooth device and try to connect
again.
The device is not correctly connected. Connect the device
correctly.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Bar 3.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Bar 3.1 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JBL Bar 3.1

JBL Bar 3.1 User Manual - German - 12 pages

JBL Bar 3.1 User Manual - Dutch - 12 pages

JBL Bar 3.1 User Manual - French - 12 pages

JBL Bar 3.1 Quick start guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info