675574
8
Zoom out
Zoom in
Previous page
1/12
Next page
8
Note:
Make sure that the sound output of your TV is set to “External
speaker”.
Depending on the remote control, this function may not work
well.
This function does not operate on LG TV’s magic remote
control.
This function may not work well when HDMI CEC is ON.
Some remote control may not operate if you press repeatedly
the volume button.
If your TV remote control is not supported, follow section 7b and
do IR remote learning.
7b. For other TVs, do IR remote learning
To program the soundbar to respond to your TV remote control,
follow these steps. First, press and hold VOLUME+ and SOURCE
button to enter learning mode.
(1)
LEARNING
>5 s
Then, press POWER button on the soundbar and press POWER
button on the TV remote control
DONE
(2)
TV
SOURCE
Follow the same procedure for VOLUME - and VOLUME +. For
mute, press bloth VOLUME + and VOLUME - button on soundbar
and press MUTE button on TV remote control.
Press and hold VOLUME+ and SOURCE button on soundbar
again and now your soundbar respond to your TV remote control.
8. SYSTEM
1. Auto standby
This soundbar automatically switches to standby after 10
minutes of button inactivity and no audio/video play from a
connected device.
2. Auto wake up
The soundbar is powered on whenever a sound signal is
received. This is most useful when connecting to the TV using
the optical cable, as most HDMI™ ARC connections enable
this feature by default.
3. Set display brightness
Press DIM button on remote control repeatedly to select a
different brightness level of the display panel on this product
4. Apply factory settings
Reset this soundbar to the default settings programmed at
the factory.
In any source mode, press and hold VOLUME -, VOLUME+
and SOURCE button on soundbar top panel until text
display shows RESET.
When the factory settings restore is complete, the product
automatically switches off and restarts.
5. Check Software version
Press and hold DIM DISPLAY button for 5 seconds in any
source, Hold and press DIM DISPLAY button for 5 seconds,
followed by SOUND MODE and NIGHT MODE button.
To check subwoofer software version, pls connect
subwoofer to soundbar via a 3.5mm AUX in cable and
follow the above procedure.
6. Software Update
JBL may offer updates for soundbar’s system rmware in the
future. If an update is offered, you can update the rmware by
connecting a USB device with the rmware update stored on
it to the USB port on your soundbar.
Please visit www
.JBL.com or contact JBL call center to
receive more information about downloading update les.
9. PRODUCT SPECIFICATIONS
General
Total Maximun Power : 450W
Soundbar Maximum Power : 150W
Soundbar Standby Power : <0.5W
Subwoofer Maximum Power : 300W
Subwoofer Standby Power : <0.5W
Soundbar Transducer Size : 6 x 2.25" racetrack drivers
3x1.25"tweeter
Subwoofer Transducer Size : 10"
•MaxSPL :103db
Frequency Response : 35Hz to 20KHz
Operating temperature : 0°C - 45°C
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Bar 3.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Bar 3.1 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JBL Bar 3.1

JBL Bar 3.1 User Manual - German - 12 pages

JBL Bar 3.1 User Manual - Dutch - 12 pages

JBL Bar 3.1 User Manual - French - 12 pages

JBL Bar 3.1 Quick start guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info