520196

Jacob Jensen 50 DECT Manual

13
Zoom out
Zoom in
Previous page
1/23
Next page
29
5. Press / to display either ”On” or ”Off” and
press to confirm. For ”Key”, select from
”Pattern 1-3” or ”Off” and press
6. Press to exit and return to standby mode.
D.6. DIAL mode
You can set your phone to use either ”Tone” or ”Pulse”
dialing. The pre-set setting is ”Tone” dialling, where you
will hear a tone beep each time you dial a number. Most
modern exchanges and switchboards use ”Tone” dialling, so
you should not need to change this setting. Only change it if
your service provider or switchboard uses ”Pulse” dialling.
Key Map:
Setting Base Additional Dial
Mode select Tone/Pulse
1. Press
to access the main menu.
2. Press
/ to select ”Setting Base”. Press
3. Press / to select ”Additional”. Press
4. Press / to select ”Dial Mode”.Press .
The current setting is displayed.
5. Press
/ to select either ”Tone” or ”Pulse”.
Press to confirm.
6. Press
to exit and return to standby mode.
D.7. Tone dialling Switch-Over
If you have set your phone to use ”Pulse” dialling, you can
switch temporarily to ”Tone” dialling for the duration of a
call:
During off-hook state, press and hold ”D” will be
displayed. Any digits entered after the ”D” will be dialled
using tone dialling.
D.8. Prefix dialling
If you need to add a prefix to the number for a long distance
call, or if you need to add your saved area code to the
number, do the following:
Key Map:
Setting Base Additional
Prefix Dial
enter the number
1. Press to access the main menu.
2. Press
/ to select ”Setting Base”. Press
3. Press
/ to select ”Additional”. Press
4. Press / to select ”Prefix Dial”.Press .
The current setting is displayed.
5. Enter the number using the number keypad or press
to clear. Press to confirm.
6. Press
to exit and return to standby mode.
D.9. Call barring
When switched on, Call Barring prevents calls from being
made to a specific number, area code or international code.
Key Map:
Setting Base Call Barring
enter the number select On/Off
1. Press to access the main menu.
2. Press
/ to select ”Setting Base”. Press
3. Press
/ to select ”Call Barring”. Press
4. Enter the number using the number keypad or to
clear. Press to confirm.
5. Press
/ to select ”On” or ”Off”. Press
to confirm.
6. Press
to exit and return to standby mode.
E. NORMAL OPERATION
E.1. Using an optional headset
An optional headset can be used as an alternative method to
make a call and this is especially useful for long calls.
Connect the headset cord to the headset jack on the back of
the base unit. When the headset is not in use, simply press
the button to toggle the headset mode and return to
normal handset or speaker phone mode.
Caution
The headset jack type is 2.5 mm pin. Please contact your
local supplier for compatible headset. Using other headsets
may damage the unit.
E.2. To make a call
Using the handset:
1. Pick up the handset. The display will show the handset
icon .
2. Use the keypad to enter the number you wish to dial.
3. Hang up the handset when finished.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jacob Jensen 50 DECT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jacob Jensen 50 DECT in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info