520196
12
Zoom out
Zoom in
Previous page
1/23
Next page
28
D. PREPARATION BEFORE USE
Attention
Your DECT phone is protected by PINs (personal
identification numbers). Never change the PINs of your base
unit unless you are familiar with electronics products and
you have a real need to protect your phone by special PINs.
A forgotten PIN could stop operation of your DECT phone
and may result in expensive technical support services. For
details please refer to section I. ADVANCED OPERATION.
D.1. The OK/MENU button
This DECT phone is built with a user-friendly MENU function.
All essential functions of this phone can be programmed
via the MENU button by a question & answer (Q&A)
approach.
By pushing on the base unit, it leads you to browse
through the following function menus in a circular manner.
You may push to browse upward and to
browse downward.
Call Log List > Internal Call> Audio Setting >Display > Time &
Alarm > Add. Settings > Setting Base > Baby Monitor >
Throughout the remaining part of this Instruction manual, a
quick Key Map will lead you to different programming areas
where you will be asked to make your selections.
D.2. Changing language
English is the factory-programmed display language. To
change the language setting:
Key Map:
Display
Select Lang.
Select
your desired language and press
1. Use / to browse through the available
languages.
2. When your desired language is shown, push
to
confirm.
D.3. Setting date/time
Depending on country and telephone operator, usually every
caller ID memory will be stored with its incoming date and
time information. It is not necessary to set the date/time for
use of this DECT phone in countries with FSK caller ID system
as the date/time information will be received automatically
from the caller ID signal. For use in countries with DTMF
caller ID system (or countries with FSK system where date/
time is not sent from the telephone operator), go through
the following procedures to set date/time information:
Key Map:
Time & Alarm Set Date & Time
Date/Time
24 Hours mode
Use the numeric buttons to enter DATE information (DD/
MM/YY format), e.g. 030609 for 3rd June 2009, push
again to enter TIME information (24:00 hours format). When
finished, push again to confirm. Press to return
to standby mode.
D.4. Telephone name
Key Map:
Display Handset Name
enter the handset name
You can change the name your phone displays on the screen.
1. Press
to access the main menu.
2. Press
/ to select ”Display”. Press
3. Press
/ to select ”Handset Name”.
Press
4. ”Handset Name” appears. Enter the name using the
number keypad. Press
5. Press
to exit and return to standby mode.
D.5. Tones
Key Map:
Audio Setting Tones select
your option select On/Off
You can switch on or off the tones for key touch,
confirmation, and call waiting. For example, when the key
tone is set to ”On”, you will hear a tone each time you press
a keypad button.
1. Press
to access the main menu.
2. Press
/ to select ”Audio Setting”.
Press
3. Press / to select ”Tones”. Press
4. Press / to select the option (i.e. ”Warning”,
”Call waiting”) and to confirm.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jacob Jensen 50 DECT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jacob Jensen 50 DECT in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info