555058
6
Zoom out
Zoom in
Previous page
1/16
Next page
JA-80Y user manual MFJ55800
6
where: xxxx is a valid access code (user or master)
_ is a space character
Example: The xxxx_CREDIT request is responded to by the following message:
Report from your alarm: Credit: Current balance is 26.35€.
Note: This instruction has to be pre-configured according to GSM provider requirements
(see 19).
8. Remote control via a telephone keypad
If you want to operate the alarm system via a phone (mobile or landline), perform the
following:
Dial the GSM communicator number. If a phone is connected to the communicator in the
house, it will ring.
If the call is not answered, the system will answer in 25 seconds. This will be indicated by
a short beep.
On your phone keypad, enter a valid access code (user or master). An acoustic reply will
be heard according to the system status.
o 1 beep = set (armed)
o 2 beeps = unset (disarmed)
o 3 beeps = programming mode
o siren sound = alarm
From this moment on, the telephone keypad will work as a system keypad.
Any subsequent change to system status is again indicated acoustically. For instance,
after unsetting the system, you will hear two beeps.
You can operate devices X or Y via the phone keypad the same way as from a system
keypad. This means *81/*80 will control device X and *91/*90 will control device Y.
To terminate the connection simply hang up. Connection is automatically terminated
if there is no entry within 60 seconds.
Note: Remote access from a landline is only possible from a phone using tone dialling
(DTMF).
9. Remote control by dialling-in
With some limitations, the communicator allows you to operate the system by ringing the
communicator. This operation requires your phone number to have been pre-authorized by
being stored in the communicator memory (see 12).
Notes:
Dialling-in operation is not enabled for phones having hidden numbers.
If phone calls end before the control panel answers, remote control is for free.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-80Y at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-80Y in the language / languages: English as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-80Y

Jablotron JA-80Y Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info