554884
6
Zoom out
Zoom in
Previous page
1/6
Next page
User manual JA-60GSM - 6 - MFJ51808
3. 73 ____ F0
4. 74 ____ F0
- ALARM SMS
- ALARM CALL (audible warning)
5. 75 ____ F0
6. 76 ____ F0
- Any ALARM, ARMING & DISARMING SMS.
- ALARM CALL (audible warning)
- Technical SMS
7. 77 ____ F0
- ALARM CALL (audible warning)
8.
Technical SMS about events in the system. This position is
reserved for service organization.
3. Customization of SMS and audible warnings
The dialer can report all possible events of the alarm system via SMS (see table 3.2.1.).
There are factory default SMS texts available for all possible events and for all possible
sources of the events. All texts can be edited.
It is possible to set which events will be reported to which telephone number.
It is possible to set which events should activate audible warnings.
It is possible to change incoming SMS command texts, which are used for remote controlling of
the system.
The control panel must be in the user mode (see section 2) to be able to use the following
programming sequences:
3.1. Events to be reported by SMS
Table 3.2.1 shows the complete list of all possible events in the alarm system. It also shows which
events are assigned to which telephone numbers to be reported via SMS. You can make your own
setting by:
81 uu t y
where:
uu is an event index from 01 to 31
t is a telephone number memory from1 to 7
y 0 = reporting disabled, 1 = reporting enabled
Example: if you enter 810371 and a Fire alarm is triggered (event index 03) by detector number 1, the
following message will be sent to the 7th telephone number: “Alarm system reports: Fire alarm
Wireless detector #1 Time: 16.04. 11:16
Note: SMS reports consist of 4 text parts (installation name, event name, source name and time) – all
of these texts can be edited, see section 3.3 for details.
3.2. Assignment of audible warnings to be reported
Table 3.2.1 also shows the complete list of all possible events in the alarm system. It shows which
events are assigned to which telephone numbers to be audibly reported. You can make your own
setting by:
82 uu t y
where:
uu is an event index from 01 to 31
t is a telephone number memory from1 to 7
y 0 = reporting disabled, 1 = reporting enabled
User manual JA-60GSM - 7 - MFJ51808
3.2.1. Table – SMS reports assignments to telephone numbers
6


Need help? Post your question in this forum.

Forumrules
1

Forum

jablotron-ja-60gsm

Reset search

  • Suddenly the system stopped and no communication with the main door panel Submitted on 24-9-2021 at 12:18

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-60GSM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-60GSM in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-60GSM

Jablotron JA-60GSM Installation Guide - English - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info