555038
6
Zoom out
Zoom in
Previous page
1/16
Next page
3) Controlling from a different phone
The car alarm can also be controlled with SMS command messages from an unauthorized phone. In such
a case you have to add a user code (password) in the command SMS before the command. The text
should be as follows: PASSWORD space COMMAND. The default user code (PASSWORD) is USER.
You can change the password using a command from the table above or ask the installer to do it for you.
An example of setting a car alarm with an SMS message from an unauthorized phone is: USER AM
An example of requesting an SMS with help is: USER HELP
D
Other services
The car alarm can also be used for securing a garage, cargo space, a caravan, etc.
Wireless detectors: Up to 8 wireless detectors can be enrolled to the car alarm. Depending on their type,
they react to the breaking of windows, motion or smoke. The detectors guard the
inside of the car, possibly even its outside up to a distance of approx. 20 meters.
After setting the car alarm, an exit delay of 20 seconds is provided to all enrolled
detectors (e.g. for leaving the garage). If a detector is triggered while the car alarm
is set (and within reach of the detector), the alarm is triggered either immediately
or after 20 seconds of the entrance delay (depending on the detector settings).
Detectors can be enrolled as internal or external ones.
• Internal detectors are not active when the car alarm is partially set, e.g. when you leave a dog in the car.
• External detectors are always enabled when the system is set.
The detectors (sensors) are powered by batteries with a lifetime exceeding 1 year. When the batteries are low,
the system sends an SMS message. Should you need more information, contact the installer or the manufacturer.
2
6
T2711 - Jablotron - Manuál Atho6 6T2711 - Jablotron - Manuál Atho6 6 8.4.2009 13:27:128.4.2009 13:27:12
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron CA-1803BT - reset 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron CA-1803BT - reset 2 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron CA-1803BT - reset 2

Jablotron CA-1803BT - reset 2 Installation Guide - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info