555038
4
Zoom out
Zoom in
Previous page
1/16
Next page
Partial setting: When you dial the car alarm number from an authorized phone (see the next
paragraph), the car alarm switches to partially set mode
3)
. The inside of the
car is not guarded by wireless internal detectors and so neither a voltage drop
detector, nor any supplementary detectors are activated in this mode.
Unsetting the car alarm: Unlocking the car with its remote control also unsets the car alarm.
2) Remote control via your telephone
With the SMS commands: Set / unset / check vehicle status – car alarm functions can be controlled via
a mobile phone. The car alarm is able to send alarm messages and dial up to
4 telephone numbers (hereinafter “the authorized phone“) when an alarm is
triggered. The authorized phone can be used to send commands by means of
SMS messages to the alarm phone number (see the table on the following page).
By dialling in from authorized phone numbers
3)
:
If the car alarm is controlled with RC-8x controllers, you just need to dial the
car alarm number (the ignition key must be switched off). The car alarm will
not answer the call (i.e. the call is not charged for) and its status will change
(set – unset – set...). If the car alarm is controlled with an original remote
control, dialling in will activate partial setting only (see paragraph 1b).
The car alarm may confi rm the change of status with an SMS message
3)
.
If you forget the wording of SMS message commands, you can ask the alarm unit for “help” by sending
the HELP command.
4
T2711 - Jablotron - Manuál Atho4 4T2711 - Jablotron - Manuál Atho4 4 8.4.2009 13:27:118.4.2009 13:27:11
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron CA-1803BT - reset 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron CA-1803BT - reset 2 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron CA-1803BT - reset 2

Jablotron CA-1803BT - reset 2 Installation Guide - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info