554831
13
Zoom out
Zoom in
Previous page
1/16
Next page
GSM Desktop Phone GDP-04 User’s Guide
JM50114_ENG.doc 13
Note: These parameters may vary according to your service provider’s settings. Default settings of connection parameters are APN =
“Internet”, Name = “”, Password = “”.
Press Apply to save your settings and Connect to log your PC onto the internet via GPRS.
Firmware update
GDP-04 offers a unique opportunity of upgrading the phone firmware through the Internet from Jablocom update server.
JabloSuite can automatically check or you can perform a manual check if new software is available. If there is a new
firmware available, you can update your phone using the Update Tool, an integrated part of JabloSuite.
Choose Tools/Update Device Firmware from the menu. We recommend synchronizing your GDP-04’s phonebook with
the PC phonebook (JabloSuite or e-mail client) prior performing the update.
Warning: Synchronize your GDP-04’s phonebook data with PC before
starting of firmware update to prevent possible data loss!
The UpdateTool will offer you all firmware versions available for your phone.
Choose Bootloader, Software and the Languages you want to upload into your
phone and select Apply. The phone will automatically switch to standby mode
as soon as the upload is finished.
PC-fax
You can use the GDP-04 as a PC-fax for sending/receiving your faxes from/to your PC.
To use the GDP-04 as a fax, you have to install fax service (optional component of Microsoft Windows installation). This
will add FAX as printing device in the list of your printers. Open properties of FAX and select GDP-04 as a device for
sending/receiving faxes during installation of a fax feature of your operating system.
To activate automatic receiving of incoming faxes you have to set-up Fax Console (Start/All
Programs/Accessories/Communications/Fax/Fax Console).
Warning: Digital fax function may not work properly unless it is fully supported by your GSM service provider.
Connecting an Analog Phone (GDP-04A only)
The GDP-04A offers you the possibility to connect a standard analog phone.
This feature allows you to operate an analog phone in a similar way as if it is connected to a standard fixed line network
(PSTN), but over a GSM network.
You can dial a number from the GDP-04A as well as from the analog phone. They can not be used simultaneously. The
call is executed through your GSM connection in both cases.
An incoming call rings on the GDP-04A as well as on the attached analog phone. The user can answer the call from
either phone.
To switch an ongoing call from the GDP-04A to the attached analog phone, press the “Space” key (on the character
keyboard). You will hear the ringing signal of three short beeps. You will be disconnected once the analog phone answers
the call. You may hang up now.
To switch an ongoing call from the attached analog phone to the GDP-04A, press the FLASH on the phone, wait for the
call to be answered on GDP-04 and then hang up.
Note: Only one phone or master PBX line (home exchange unit) can be attached.
Warning: Never connect the GDP-04 into a wall socket of a fixed line network (PSTN).
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablocom GDP-04 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablocom GDP-04 in the language / languages: English as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablocom GDP-04

Jablocom GDP-04 User Manual - German - 16 pages

Jablocom GDP-04 User Manual - Dutch - 16 pages

Jablocom GDP-04 User Manual - French - 16 pages

Jablocom GDP-04 User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info