498510
5
Zoom out
Zoom in
Previous page
1/28
Next page
5
SET-UP
1. Connect POWER SCAN to your computer’s USB port with the included USB cable.
Note: The first time you connect POWER SCAN to your computer, wait a few seconds until you
see a dialog box that says "Found New Hardware" (this means the computer recognizes
POWER SCAN). After you see this, POWER SCAN is ready to use.
2. Insert your appropriate holder and film.
a. If you are scanning a slide, insert it into the FILM
HOLDER SLOT on the top of the device.
b. If you are scanning a strip of negatives, insert the
included strip film guide into the FILM HOLDER SLOT on
the top of the device. Then insert one end of the negative
strip into the FILM HOLDER SLOT on the right side of the
device. Turn the FILM FEEDER WHEEL
counterclockwise while gently "feeding" the negative into
the slot. (If you want to go back to a previous frame or if
the negative strip is getting jammed, turn the FILM
FEEDER WHEEL clockwise while gently pulling the
negative from the slot.)
Note: The negative strip itself must be at least three
frames long. Otherwise, it may get stuck in the device. If
a negative strip becomes jammed in the device, you can loosen it by inserting the included
film retrieval strip into the FILM HOLDER SLOT.
Note: Handle negatives with care. Any dust, scratches or fingerprints will show up on your
saved images. If possible use cotton gloves when handling negatives. It is recommended
to use compressed air to remove any dust on the negatives. This is not included with the
film scanner but can be purchased from an office or electronics supply retailer.
c. If you are scanning a single negative frame, insert it into the included single frame holder
and insert it into the FILM HOLDER SLOT on the top of the device.
d. In the event that films are not able to get out from the film scanner, insert the film retrieval
strip into the scanner, and use it as a tool to retriever the film out by feeding it into the
device.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ion POWERSCAN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ion POWERSCAN in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ion POWERSCAN

Ion POWERSCAN Quick start guide - English, German, Dutch, French, Italian, Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info