519193
62
Zoom out
Zoom in
Previous page
1/64
Next page
62
PROBLEEMOPLOSSING
PROBLEEM
MOGELIJKE OORZAAK OPLOSSING
De FILM 2 PC wordt niet
herkend door de PC
Er verschijnt een Windows-
bericht "apparaat wordt niet
herkend"
FILM 2 PC niet aange-
sloten op een USB 2.0-
poort
De PC dient over USB 2.0 te beschikken om
met de FILM 2 PC te kunnen communiceren.
Controleer of USB 2.0 op de PC is geïnstal-
leerd. Als dit niet het geval is kunnen de USB-
poorten van een upgrade worden voorzien.
Deze hardware is bij de meeste elektronica-
zaken verkrijgbaar.
Mijn PC beschikt over USB
2.0, maar het apparaat wordt
nog steeds niet herkend
Het kan zijn dat niet alle
poorten op de PC versie
2.0 zijn.
Zelfs wanneer USB 2.0 is geïnstalleerd kan
het zijn dat niet alle poorten geschikt zijn voor
USB 2.0. Controleer alle USB-poorten om die
poorten te vinden die voor versie 2.0 geschikt
zijn.
De installatie-CD start niet
automatisch
Er kan een probleem zijn
met het CD-station.
Controleer de werking van het CD-station.
Controleer, Indien mogelijk, op een andere PC
of de CD daar wel herkend wordt.
Als het mogelijk is door de inhoud van de CD
te bladeren, maar de installatie niet automa-
tisch begint, dubbelklik dan op Install.exe.
Windows-waarschuwing dat
het apparaat "geen Microsoft
logotesten heeft doorstaan".
Dit is normaal. Klik op OK
om door te gaan.
Kies "Toch doorgaan". Het apparaat is niet
schadelijk voor de PC. (Er wordt aan
Windows-certificering voor deze software
gewerkt)
De FILM 2 PC werkt maar
sommige dia's of negatieven
zien er overbelicht uit.
De tijd voor automatische
belichting varieert met de
configuratie van de PC.
Het apparaat stelt zichzelf in op de belichting
van uw dia/negatief. Wacht voor het venster
met de daadwerkelijke afbeelding om de
aanpassing voor de belichting te stoppen en
klik op "Capture" of knop COPY bovenop het
apparaat.
Controleer de dia's of negatieven om te zien of
het origineel wellicht overbelicht is geweest.
Er zijn verschillende softwaretoepassingen
beschikbaar om de nieuw-gedigitaliseerde
foto's te verbeteren.
Er staat een zwarte rand
rond de kant van de
afbeelding.
De dia of film kan onjuist in
de houder geplaatst zijn, of
de houder is wellicht niet
volledig in de FILM 2 PC
geplaatst.
Verwijder de houder uit de FILM 2 PC en
waarborg dat de dia of film juist in de houder
geplaatst is. Plaats de houder opnieuw in de
FILM 2 PC (de houder dient op zijn plaats te
'klikken' bij juiste plaatsing).
Als de zwarte rand nog steeds zichtbaar is,
kan de software worden gebruikt om de foto
bij te knippen (zie "Bewerken van uw foto's").
Dit symbool op het product of in de handleiding geeft aan dat elektrische en elektronische
apparaten na afloop van de gebruiksduur niet bij het huishoudelijk afval mogen worden
geplaatst. Er zijn aparte inzamelsystemen voor hergebruik in de EU. Voor meer informatie
kunt u contact opnemen met uw lokale overheid of de verkoper waar u het product hebt
aangeschaft.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ion FILM 2 PC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ion FILM 2 PC in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info