611568

Iomega EZ Media and Backup Center Manual

79
Zoom out
Zoom in
Previous page
1/139
Next page
Personal Cloud: Accessing Your Device From Anywhere in the World
Configuring Router Port Forwarding for Personal Cloud
In most cases, your Iomega StorCenter attempts to automatically configure your router. However, if
it cannot, a message displays that your router is not configured for port forwarding, and you must
manually configure your router to forward a specific port to your Iomega device . Most routers refer
to this as port forwarding, application access, or virtual server. It is recommended that you refer to
your router's documentation for setting these values. When you set up port forwarding, you are
allowing data to travel through your Personal Cloud between your Iomega device and trusted
devices.
When you have selected a port value to forward for Personal Cloud, click Settings on the
Personal Cloud page, and enter your selected port number in the Personal Cloud settings dialog box.
If you have more than one Personal Cloud, you can enter a range of port values for your Personal
Clouds. The range of port values is 50500-50599. You must also port forward port 443 to enable https
access to your Iomega device .
Router Port Forwarding
Some routers have a UPnP option. If you have a UPnP router, enabling this option allows the Iomega
device software to automatically configure the correct forwarding ports. Otherwise, you must
perform additional steps by manually enabling port forwarding on your home network router. Port
forwarding allows invited users to connect remote computers or other Iomega device devices outside
of your local area network (LAN) as trusted devices to the Personal Cloud on your network.
Note: Port forwarding must be configured for both the network router on which the Personal Cloud
is configured, and any remote network from which trusted devices are accessing the Personal Cloud.
The following steps are generic router settings. If you have never logged into your router before, you
must consult the manufacturer’s documentation to find specific details such as default IP address,
default administrator account, and password.
1. Log in to your router by entering its IP address in the browser’s URL field from your computer.
If prompted, enter administrator account name and password.
2. Navigate to the Port Forwarding configuration page. This is often related to Port Mapping,
Application, Virtual Server, or Gaming configuration options.
3. Type in the desired application or service name. This is typically a blank or drop-down field
where you can type or choose a user-specified application or service name for the port you are
forwarding. Create a new entry with a value like “Iomega Personal Cloud ” in this field.
4. Enter a port number for the Personal Cloud service in the range 50500-50599 in both the port
start and port end fields. Port number 50500 is the default. It should not be necessary to
change this value, but if you do, choose the next available port; for example, 50501. If you
decide to choose a port in the higher range, note that the Media Server uses the same range of
ports, numbering backwards from 50599.
5. Repeat the previous step, using port 443 to enable https communication with your Iomega
device .
6. Enter the IP address of your Iomega device which contains the Personal Cloud. The IP address
displays on the System Status page when you log into the device's web interface.
7. Save the changed settings.
8. Reboot the router if required.
69
… 79 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iomega EZ Media and Backup Center at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iomega EZ Media and Backup Center in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info