Manual Intermatic EH40 (page 2 of 8) (English, French, Spanish)

557985

Zoom out

Zoom in

1/8

year intervals as part of the normal time switch

maintenance observing battery polarity markings when

installing. No other maintenance is required.

Place the slide switches in the AUTO and RUN position.

9. Reapply power to the time switch.

10. Press the recessed reset switch for at least two

seconds. The display will show 12:00 A.M. and MO.

Note that the days of the week are identified with the

first two letters of the day (MO for Monday).

The timer is now ready for programming. Refer to the

examples which follow and enter the scheduled events

(set points) required. Assign each of the 12 set

points (EVENTS) entered to whichever day or groups

of days of the week you wish an ON or OFF

operation to occur.

Set Point = Event = ON = OFF

PROGRAMMING STEPS:

SET CURRENT DAY AND TIME

Slide switch to TIME SET. Push DAY until current day

shows, then push HOUR until current hour AM or PM

shows. Now push MINUTE until current minute

shows. Clock is now set. Follow same procedure after

replacing battery or changing time (such as

for daylight saving time).

SET YOUR PROGRAM

Slide switch to PROG. Display will look like this: (-:- -)

•Press DAY until desired program period shows (see

choices in “PROGRAM PERIOD OPTIONS” section

above).

• Press HOUR until desired “ON 1” hour shows (that

is, the first time each day of the program period that

you want the load to turn ON).

• Press MINUTE until desired minute shows.

• Press EVENT to program time for ON 1 (and to

advance to programming for OFF 1).

• Press DAY again until all seven days of the week

show (or until another desired program period

option shows; see “PROGRAM PERIOD

OPTIONS”).

• Press HOUR again until desired “OFF 1” hour shows

(that is, the first time each day of the program

period that you want the devices to turn OFF).

• Press MINUTE until desired minute shows.

• Press EVENT to set time for OFF 1. You may now

begin setting ON 2, a second ON time, for the same

program period, OR press DAY to change to a

different program period.

• Repeat above procedure until all desired ON/OFF

programs are set.

PLEASE NOTE: Before you program your timer, or when you

remove the battery, or when you use the RESET, pressing

EVENT will display the bar symbol -:-- ON 1. Repeated press-

ing of EVENT will display all the way through the final bar sym-

bol -:-- OFF 6. Once you program your timer, however, each

actual time setting you make will replace the bar symbol. While

programming, each time you press EVENT you will advance to

the next EVENT.

PROGRAM PERIOD OPTIONS:

Your timer gives you up to 6 different ON and 6 different OFF

settings per program period. You can use all 6 settings per peri-

od, or as few as you like. A program period covers one of these:

• ALL 7 DAYS OF THE WEEK combined into one -

display shows: MO TU WE TH FR SA SU.

• MONDAY THRU FRIDAY combined into one -

display shows: MO TU WE TH FR.

• SATURDAY AND SUNDAY combined into one -

display shows: SA SU

•EACH INDIVIDUAL DAY OF THE WEEK -

display shows only that day.

•BLANKDAY EXPLANATION - “BLANKDAY”

follows Sunday after last push of DAY button (when

the lower slide switch is set at PROGRAM). The

purpose of the BLANKDAY is to disable a program

setting on a day.

Program periods with days “combined into one” help you

make settings for those multiple days quickly and conve-

niently while using only one ON/OFF pair. When you set

such a program period, all settings will be identical for

every day of that period.

PERSONAL

PROGRAM EXAMPLES

EVENTS

DAY CHECKS ON TIMES OFF TIMES DISPLAYED DAYS & TIMES DISPLAYED

EXAMPLE 1

MO TU WE TH FR SA SU 5:00 PM 10:00 PM ON 1 MO TU WE TH FR SA SU 5:00 PM

OFF 1

EXAMPLE 2

MO TU WE TH FR

6:00 PM 10:00 PM ON 1 MO TU WE TH FR 6:00 PM

OFF 1 MO TU WE TH FR

10:00 PM

SA SU 4:00 PM 8:00 PM ON 2 SA SU 4:00 PM

OFF 2 SA SU 8:00 PM

EXAMPLE 3

MO TU WE TH FR 6:00 AM 9:30 AM ON 1 MO TU WE TH FR 6:00 AM

OFF 1 MO TU WE TH FR 9:30 AM

MO TU WE TH FR 5:30 PM 11:15 PM ON 2 MO TU WE TH FR 5:30 PM

OFF 2 MO TU WE TH FR 11:15 PM

SA SU 3:00 PM 10:00 PM ON 3 SA SU 3:00 PM

OFF 3

SA SU 10:00 PM

EXAMPLE 4

MO TU WE TH 8:00 PM 11:30 PM ON 1 MO TU WE TH 8:00 PM

OFF 1 MO TU WE TH 11:30 PM

FR SA 5:00 PM 2:20 PM ON 2 SU 7:00 PM

(DAY AFTER) OFF 2 SU 10:30 PM

SU 7:00 PM 10:30 PM ON 3 FR 5:00 PM

OFF 3

MO 11:30 PM

ON 4

SA 5:00 PM

OFF 4

TU 11:30 PM

ON 5 “BLANKDAY” -:- -

OFF 5 WE 11:30 PM

ON 6 “BLANKDAY” -:- -

OFF 6 TH 11:30 PM

NOTE: “-:- -” follows Sunday after last push of DAY button

(when the slide switch is set at PROG). The purpose of the

-:- - is to cancel a program setting on that day.

REVIEW YOUR PROGRAM

Slide switch to PROG. Press EVENT button to advance

display to each ON or OFF setting. Check days and times

displayed. To make a change, follow instructions under

“SET YOUR PROGRAM”. To delete a displayed set point,

press DAY button until “-:- -” is displayed.

GENERAL FEATURES AND HINTS FOR TROUBLE-

FREE USE

• BUTTON: When you press a button, there is an advance

of one time unit; holding a button down advances contin-

uously until released.

• MAINTENANCE: With the exception of battery replace-

ment at 2-3 year intervals, your Intermatic timer is

maintenance-free.

• AFTER THE INSTALLATION IS COMPLETED, THE

LOCKABLE HASP SHOULD BE MOVED TO THE UP

POSITION TO ENGAGE THE COVER WHEN IT IS

CLOSED.

FULL ONE YEAR WARRANTY

If within one (1) year from the date of purchase, this product fails

due to a defect in material or workmanship, Intermatic

Incorporated will repair or replace it free of charge. The warranty

does not apply to (a) damage caused by accident, abuse, mis

handling or dropping: (b) units which have been subject to unau-

thorized repair, opened, taken apart; (c) units not used in accor-

dance with directions; (d) damages exceeding the cost of the

product. Some states do not allow a limitation of damages, so the

foregoing limitation may not apply to you. This warranty gives you

specific legal rights, and you may also have other rights which

vary from state to state.

This warranty service is available by either (a) returning the prod-

uct to the dealer from whom the unit was purchased, or (b) mail

ing postage prepaid to the authorized service station listed below.

Please be sure to wrap the product securely when mailing to

avoid damage.

This warranty is made by: Intermatic Incorporated,

Intermatic Plaza, Spring Grove, Illinois 60081-9698.

AUTHORIZED SERVICE STATION

INTERMATIC INCORPORATED

4720 West Montrose Avenue

Chicago, Illinois 60641

INTERMA

TIC INCORPORA

TED

SPRING GROVE, ILLINOIS 60081-9698

158ET8805 PRINTED IN U.S.A.

TIMER

POWER

LOAD

NEUTRAL

234

Fig. 4

Fig. 5

TIMER

POWER

LINE 1

LINE

LINE 2

LINE 1

LINE 2

LOAD

120 ≈

240≈

EH10

EH40

- 2 -

See

Pg. 7

See

Pg. 7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Intermatic EH40 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Intermatic EH40 Manual

Product: