629286

Interlogix NXG-1820-EUR Touch Screen Manual

4
Zoom out
Zoom in
Previous page
1/6
Next page
4 / 6 P/N 230444 • REV A • ISS 01SEP15
Emergency panic buttons
Touch the SOS button on the main screen to display the
emergency panic buttons (if enabled by your installation
company):
On this screen touch and hold the appropriate button for 2
seconds to activate Manual Fire Alarm, Manual Medical Alarm,
or Manual Police Alarm.
To silence an audible emergency panic alarm – return to the
home screen, touch the Status button and turn the partition off.
Navigating the Main Menu
Enter a valid PIN code to unlock the screen.
Touch MENU to access the user menu settings. A valid PIN
code is required to view the menus you have access to. A
master user will have more options than a standard user.
Security
Partitions – this menu allows you to view and control each
partition of the security system.
Zones – this menu allows you to view zone status, bypass
zones, activate/deactivate Chime mode for a zone.
Smoke Reset – this button performs a reset on hardwired
smoke detectors connected to your xGen security system. A
reset is required after each fire alarm or fault.
Controls
Action – view and activate actions, shortcut to action
programming.
History
This menu gives you access to the xGen event log. The event
log will show the most recent event. Touch the up arrow to see
an earlier event. Touch the down arrow to see the next event.
Each event is numbered. “1” represents the most recent event.
Up to 1024 events are stored.
Users
Add.Modify – add or modify an existing user’s name, PIN code,
profile, or schedule.
View – view an existing user’s name, PIN code, profile, or
schedule.
Delete – remove a user from the system.
Status – display a user’s status.
Copy – duplicate an existing user(s).
Search by PIN – find a user if you have their full PIN code.
Testing
Siren – test the siren.
Battery – test the battery.
Comm (Communicator) – test the communicator.
Zone Walk – select zones for walk test mode.
Time
Time & Date – set the time and date.
Holiday – see the holidays programmed, shortcut to holiday
programming.
Settings
Keypad – adjust keypad settings:
• Sound – set keypad volume.
• Display – set screen brightness, screen saver timeout.
Labels – set up names or mesages:
• Partitions – provide a custom name to partitions.
• Zones – provide a custom name to zones.
• Outputs – provide a custom name to outputs.
• Entry Message – displays during entry delay.
• Exit Message – displays during exit delay.
• Reporting
• Status – view connection status, view panel details.
Clean Me
Disable the NXG-1820E Touch Screen for 20 seconds so it
can be cleaned without activating any features.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Interlogix NXG-1820-EUR Touch Screen at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Interlogix NXG-1820-EUR Touch Screen in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info