789241
114
Zoom out
Zoom in
Previous page
1/186
Next page
114
Adjusting the motor belt
If the treadmill occasionally fails to move
while you are running, this is probably
because the motor belt is loose and needs
adjusting.
Remedy
Step 1: Open the cover over the motor. Allow
the treadmill to run at its lowest speed.
Step 2: Stand on the treadmill and let it move
you backwards while you hold on to the
handles and try to press the treadmill hard
down towards the plate.
Step 3: If the treadmill does not stop running
round as you do this, either the treadmill
or the motor belt needs adjusting. They are
correctly set.
If the treadmill stops when you step hard on
it, but the front roller continues, the treadmill
needs adjusting (see Adjusting the treadmill).
If both the treadmill and the front roller
stops, adjust the motor belt.
Adjustment
Step 1:
Unplug the treadmill and remove the cover
from the motor.
Step 2:
Undo the 4 screws and adjust the threaded
rod using a 6 mm Allen key. If you can run
the motor belt more than 120 degrees
backwards, it is too loose. It must be
tightened. If you can only run the motor belt
around 60 degrees backwards, it is tightened
correctly. It must not be adjusted.
Step 3:
Retighten the motor and replace the cover
over the motor.
114

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for InShape 17542 - RB3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of InShape 17542 - RB3500 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 7,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info