670299
19
Zoom out
Zoom in
Previous page
1/20
Next page
5
SPECIFICATIONS
16
General
Frequency coverage: 01.80001.999 MHz
03.50013.999 MHz
07.00017.300 MHz
10.10010.150 MHz
14.00014.350 MHz
18.06818.168 MHz
21.00021.450 MHz
24.89024.990 MHz*
1
28.00029.700 MHz*
1
50.00054.000 MHz
*
1
The U.S.A. version can only be
used the antenna tuner on the
2428 MHz bands.
Antenna connector :
Input PL-239×2 (50 )
Output PL-239×4 (50 )
Usable temperature : 10°C to 40°C (14°F to 104°F)
range
Power supply requirement:
non-Europe versions
100120 V AC or
200240 V AC (±10 %)
Europe version 230 V AC (±10 %)
Dimensions (W × H × D):
Linear amplier 350 × 265 × 375 mm
13
25
32 × 10
7
16 × 14
3
4 in
Remote controller 205 × 71 × 68.3 mm
8
1
16 × 2
25
32 × 2
11
16 in
(Projections not included)
Weight : 25 kg (55 lb)
(incl. remote controller)
CI-V connector : 2-conductor 3.5(d) mm (
1
8")
Transmitter
Output power :
Driving power : 100 W max.
Spurious emissions : 60 dB (HF bands)
70 dB (50 MHz band)
SEND connector : Phono (RCA)
ALC connector : Phono (RCA)
Antenna tuner
Matching impedance range:
HF bands*
2
16.7 to 150 unbalanced
(Less than VSWR 3:1)
50 MHz band 20 to 125 unbalanced
(Less than VSWR 2.5:1)
*
2
The U.S.A. version can only be tuned within 1.801.95
MHz of the 1.8 MHz band.
Minimum operating : 60 W
input power
Tuning accuracy : VSWR 1.5:1 or less
Insertion loss : Less than 1.0 dB
(after tuning)
MODE
INPUT AC VOLTAGE
200240 V AC 100120 V AC
CW, RTTY 1 kW 500 W
SSB 1 kW PEP 500 W PEP
DECLARATION
OF CONFORMITY
Icom Inc. Japan
6-9-16, Kamihigashi, Hirano-ku
Osaka 547-0002, Japan
Kind of equipment: HF+50 MHz 1 KW LINEAR AMPLIFIER
Type-designation: IC-PW1 + opC-853
Signature
Authorized representative name
Place and date of issue
T. Aoki
General Manager
Icom (Europe) GmbH
Himmelgeister straße 100
D-40225 Düsseldorf
Düsseldorf 14D. Dec. 1998
Icom (Europe) GmbH
These equipments comply with the European harmonised standard
ETS300 684 (EMC product standard for Commercially Available
Amateur Radio Equipment).
These equipments also comply with the requirements of the 73/23/EEC
directive for electrical safety. This compliance is based upon the
harmonised CENELEC generic standard EN60 065: 1993 +A11.
(Report No.: E 9861504 E 01 and E 9860764 E 01 by TÜV Rheinland
Germany)
Versions of the IC-PW1 which dis-
play CE on the serial number seal,
comply with the essential require-
ments of the 89/336/EEC directive
for Electromagnetic Compatibility.
NOTE: To meet European EMC regulations,
the OPC-853 AC cable with EMC lter must be
connected to the IC-PW1 Europe version.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom iPW1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom iPW1 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info