670299
18
Zoom out
Zoom in
Previous page
1/20
Next page
4
MAINTENANCE
15
PROBLEM POSSIBLE CAUSE SOLUTION REF.
Power does not come
on when the [POWER]
switch is pushed.
Cable connection is faulty.
The circuit breaker is turned OFF.
Check the connection and connection cable
pins.
Check for the cause, then turn the circuit
breaker ON.
pgs.
79
p. 3
Sensitivity is low. The antenna is not connected properly.
The antenna for another band is
selected.
The antenna is not properly tuned.
Reconnect the antenna connector.
Select an antenna suitable for the operating
frequency.
Push [TUNER] for 2 sec. to manually tune the
antenna.
p. 6
p. 13
p. 14
Output power is too
low.
Reverse connection on the antenna input
and output.
[ALC adj] is not adjusted properly.
The linear amplifier circuit is turned OFF.
The antenna for another band is
selected.
The antenna is not properly tuned.
The protector circuit activates and a band
indicator blinks.
Connect properly.
Set [ALC adj] properly.
Push [AMP/PROTECT] to turn the linear
amplifier ON. (The indicator lights green.)
Select an antenna suitable for the operating
frequency.
Push [TUNER] for 2 sec. to manually tune the
antenna.
Stop the exciters transmission, then push
[AMP/PROTECT] to deactivate the protection
circuit.
pgs.
79
p. 11
p. 13
p. 13
p. 13
p. 14
Protection circuit
activates during short
periods of operation.
Antenna SWR is more than 3:1.
The antenna tuner is turned OFF.
The linear amplifier is located in an area
with bad air circulation.
[ALC adj] is not adjusted properly.
Check the antenna SWR. Adjust the antenna, if
necessary.
Push [TUNER] to turn the antenna tuner ON.
Select a location with good air circulation.
Adjust [ALC adj] to the correct position.
p. 6
p. 14
p. 11
Operating band does
not change
automatically.
Cable connection is faulty.
The CI-V setting is not properly
programmed.
Check the connection and connection cable
pins.
Set the CI-V address.
pgs.
79
p. 12
Troubleshooting
The following chart is designed to help you correct
problems which are not equipment malfunctions.
If you are unable to locate the cause of a problem or
solve it through the use of this chart, contact your near-
est Icom Dealer or Service Center.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom iPW1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom iPW1 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info