521907
4
Zoom out
Zoom in
Previous page
1/6
Next page
6 7
Eindringlinge über die technischen Mittel verfügen, das
gesamte System oder einen Teil davon zu umgehen, blockie-
ren oder abzuschalten.
Die Sensoren unzureichend oder gar nicht mit Strom versorgt
werden.
Die Sensoren unangemessenen Umwelt-/Temperaturbedin-
gungen ausgesetzt werden, beispielsweise zu nahe an einer
Hitzequelle positioniert sind.
Hinweis:
Unzureichende Wartung ist der häugste Grund für Aus-
fälle bei einer Alarmanlage. Testen Sie Ihr System des-
halb mindestens einmal pro Woche, um sicherzustellen,
dass die Sensoren und Alarmfunktionen richtig funkti-
onieren. Obwohl ein Alarmsystem möglicherweise dazu
beiträgt, dass Ihre Versicherungsprämien günstiger
ausfallen, ist das System kein vollwertiger Ersatz für eine
Versicherung.
English
Please keep these instructions in a safe place for future
reference.
Kit Contents:
1x i.onik
®
Flood Sensor
1x Double-sided adhesive pad
1x Instruction leaet
1. Introduction
The i.onik
®
Flood Sensor is designed to trigger the i.onik
®
Alarmsystem Smart Panel when it detects an area of the home
or ofce where ooding has occurred.
The sensor consists of two parts, a transmitter and a water
sensor (which should be positioned where the presence of
water needs to be monitored such as under a kitchen sink,
bath or in a cellar). On sensing the presence of water the Flood
Sensor triggers the Wire-free Home Alarm, which should be set
to indicate the specic zone which has been triggered.
2. Location
First determine the location of the Flood Sensor,
which should be placed:
Where the presence of water may be detected.
The metal contacts of the water sensor must
both be in direct contact with water for the
alarm to activate, but no other part of the sensor
should be allowed to be sub-merged in water.
On any hard or at surface using the double-sided
adhesive strips provided.
Away from extreme temperature sources (radiators, ovens,
stoves etc) and large metal objects that could interfere with
wireless performance.
Water Sensor
Fig. 1
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for I-onik WS-106 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of I-onik WS-106 in the language / languages: English, German as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info